This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
- Ground Vehicle Standard
- J1453/3_201206
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
The three parts of SAE J1453 cover material, dimensional, and performance requirements of steel O-ring face seal (ORFS) connectors for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for nominal tube diameters of 6 mm through 50 mm. SAE J1453-3 covers the requirements for O-ring face seal connectors to inch stud ends along with the associated adapters, bulkhead and union connectors. Inch hex dimensions of parts will be moved from the main document to an informative annex after 2013.
Rationale
This revision of the standard adds size −32, corrects Table 2, adds the metric hex as the preferred option for new design, standardizes the nomenclature used in the tables and reorganizes tables from landscape to portrait mode.
In an effort to standardize within a global market and ensuring that companies can remain competitive in an international market, it is the intent to convert to metric hex sizes which will:
-
-
lead to one global system
-
-
guide users to preferred system
-
-
reduce complexity
-
-
eliminate duplications
The optional inch hexes now contain the note “NOT TO BE USED FOR NEW DESIGN” in accordance with the Metric Hex Resolution approved during the March 2008 FCCTC meeting.
INCH HEX DIMENSIONS OF PARTS WILL BE MOVED FROM THE MAIN DOCUMENT TO AN INFORMATIVE ANNEX AFTER 2013 AND ONLY METRIC HEX DIMENSIONS OF PARTS WILL BE INCLUDED IN THE MAIN DOCUMENT
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1 | QUICK REFERENCE CHART: TUBE OD TO INCH PORT STUD END SIZES, HEX NUT SIZES, QUALIFICATION TEST TORQUES AND WORKING PRESSURES | |
TABLE 1 | QUICK REFERENCE CHART: TUBE OD TO INCH PORT STUD END SIZES, HEX NUT SIZES, QUALIFICATION TEST TORQUES AND WORKING PRESSURES | |
TABLE 2 | QUICK REFERENCE CHART: TUBE OD TO METRIC PORT STUD END SIZES, HEX NUT SIZES, QUALIFICATION TEST TORQUES AND CONNECTOR WORKING PRESSURES | |
TABLE 2 | QUICK REFERENCE CHART: TUBE OD TO METRIC PORT STUD END SIZES, HEX NUT SIZES, QUALIFICATION TEST TORQUES AND CONNECTOR WORKING PRESSURES | |
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
TABLE 3 | DIMENSIONS FOR HEX TOLERANCES | |
TABLE 4 | WORKING PRESSURES FOR O-RING FACE SEAL CONNECTORS | |
TABLE 5 | INCH AND METRIC TUBE SIZE LIMITS | |
TABLE 6 | TEST PRESSURES FOR O-RING FACE SEAL CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 7 | CONNECTOR QUALIFICATION TEST TORQUES | |
TABLE 8 | ORDERING CODE EXAMPLES | |
TABLE 9 | DIMENSIONS OF BRAZE-ON SLEEVE FOR INCH AND METRIC TUBES | |
TABLE 10 | DIMENSIONS OF BRAZE-ON REDUCING AND EXPANDING SLEEVES FOR INCH AND METRIC TUBES | |
TABLE 11 | DIMENSIONS OF INCH HEX TUBE NUT | |
TABLE 12 | DIMENSIONS OF ADJUSTABLE STUD ELBOW CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 12 | DIMENSIONS OF ADJUSTABLE STUD ELBOW CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 13 | DIMENSIONS OF ADJUSTABLE STUD TEE AND CROSS CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 13 | DIMENSIONS OF ADJUSTABLE STUD TEE AND CROSS CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 14 | DIMENSIONS OF STRAIGHT STUD CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 14 | DIMENSIONS OF STRAIGHT STUD CONNECTORS WITH SAE J1926-2 STUD ENDS | |
TABLE 15 | DIMENSIONS OF INCH HEX BULKHEAD CONNECTORS | |
TABLE 15 | DIMENSIONS OF INCH HEX BULKHEAD CONNECTORS | |
TABLE 16 | DIMENSIONS OF INCH HEX UNION STRAIGHT, 90 DEGREE UNION ELBOW, UNION TEE AND UNION CROSS | |
TABLE 17 | DIMENSIONS OF INCH HEX SWIVEL CONNECTORS | |
TABLE 18 | DIMENSIONS OF SWIVEL STUD CONNECTORS | |
TABLE 18 | DIMENSIONS OF SWIVEL STUD CONNECTORS | |
TABLE 19 | DIMENSIONS OF INCH BRAZE-ON STRAIGHT CONNECTORS | |
TABLE 20 | DIMENSIONS OF INCH HEX PLUGS | |
TABLE 21 | DIMENSIONS OF INCH HEX CAP ASSEMBLY | |
TABLE 22 | DIMENSIONS OF INCH HEX FACE SEAL REDUCER WITH NUT | |
TABLE 23 | DIMENSIONS OF FACE SEAL REDUCER WITHOUT NUT | |
TABLE A1 | STANDARD PART SIZE FOR TUBE AND STUD SIZE CONNECTIONS | |
TABLE B1 | REDUCTION FACTORS FOR STRAIGHT CONNECTORS WITH SMALLER O-RING FACE SEAL END | |
TABLE B2 | L , FOR STRAIGHT STUD CONNECTORS WITH LARGER FACE SEAL END | |
TABLE B3 | REDUCTION FACTORS FOR FACE SEAL END ON SHAPED CONNECTORS WITH SMALLER FACE SEAL END | |
TABLE B4 | REDUCTION FACTORS FOR L LENGTH ADJUSTABLE O-RING BOSS END ON SHAPED CONNECTORS | |
TABLE B5 | REDUCTION FACTORS L , L , AND L FOR SWIVEL END ON SHAPED AND STRAIGHT CONNECTORS | |
TABLE D1 | DIMENSIONS OF 90 DEGREE ADJUSTABLE ELBOW, TEE, AND CROSS JUMP CONNECTORS | |
TABLE D2 | DIMENSIONS OF 45 DEGREE ADJUSTABLE ELBOW JUMP CONNECTORS | |
TABLE D3 | DIMENSIONS OF STRAIGHT STUD JUMP CONNECTORS | |
TABLE D4 | DIMENSIONS OF LONG, STRAIGHT STUD JUMP CONNECTORS | |
TABLE D5 | DIMENSIONS OF STRAIGHT UNION JUMP CONNECTORS | |
TABLE D6 | DIMENSIONS OF 90 DEGREE SWIVEL JUMP CONNECTORS | |
TABLE D7 | DIMENSIONS OF STRAIGHT SWIVEL JUMP CONNECTORS |
Issuing Committee
Hydraulic Tube Fittings Committee
The Hydraulic Tube Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic and pneumatic tube fittings for all fluid power applications except hydraulic and pneumatic brake applications Participants in the FCCTC Hydraulic Tube Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.