This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes
- Aerospace Standard
- AS59158A
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) describes taps, thread plug gages, inserting tools, expanding tools, offset and staking tools, tang break-off tools, extracting tools and thread repair kits.
Rationale
This aerospace standard is being reviewed due to 5 year cycle; in addition, to incorporate customer requirements.
Recommended Content
| Aerospace Material Specification | Inserts, Thread Form Phosphor Bronze, 95cu 4.6sn 0.19p |
| Aerospace Material Specification | Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08) |
| Aerospace Standard | PROPELLER SHAFT END - FLANGED 4.250 (107.95) BOLT CIRCLE |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Table 1 | Taps, spark plug, dimensions for screw thread inserts (STI) | |
| Table 2 | Pitch and major diameters for Class 3b gages | |
| Table 2 | Pitch and major diameters for Class 3b gages (continued) | |
| Table 3 | Pitch and major diameters for Class 2b gages | |
| Table 3 | Pitch and major diameters for Class 2b gages (continued) | |
| Table 4 | Pitch and major diameters for gages, spark plug threads | |
| Table 5 | Type III, Class 1, Style a, prewinder inserting tool with threaded mandrel for 1/2 (0.500) and smaller unified coarse and fine screw thread inserts | |
| Table 6 | Type III, Class 1, prewinder inserting tools for 14 mm and 18 mm spark plug threads | |
| Table 7 | Type III, Class 1, Style b prewinder inserting tool for 9/16 (0.5625) through 1-1/2 (1.500) unified fine thread series | |
| Table 8 | Type II, Class 2, Style a mandrel inserting tool for #2 (0.086) and #3 (0.099) unified coarse thread series | |
| Table 9 | Type III, Class 2, Style b mandrel inserting tool for 9/16 (0.5625) and larger unified coarse thread sizes | |
| Table 10 | Type III, Class 3 expanding tools, plunger type, spark plug inserts | |
| Table 11 | Type III, Class 4, offset tools, spark plug inserts | |
| Table 12 | Type III, Class 5, staking tools, spark plug inserts | |
| Table 13 | Type IV, Class 1, Style a, tang break-off tool for 1/4 (0.250) and smaller unified coarse and fine thread sizes | |
| Table 14 | Type IV, Class 1, Style b, tang break-off tool for unified coarse and fine thread sizes 5/16 (0.3125) through 1/2 (0.500) | |
| Table 15 | Type IV, Class 2, tang break-off tool for unified coarse and fine thread sizes 1/2 (0.500) and smaller | |
| Table 16 | Type V, extracting tools | |
| Table 17 | Kit compositions | |
| Table 18 | Modular tool box dimensions | |
| Table 19 | Classification of defects in accordance with MIL-STD-105 |
Issuing Committee
The SAE EG-1B Aerospace Hand Tool Committee addresses all facets of aerospace hand tools and tool kits in of support equipment-design, maintenance, and in-service experience. It focuses on support equipment and facilities related to gas turbine engine testing, balancing, engine accessory testing, inspection, packaging, handling, and transportability. High performance hand tools for aerospace applications are also addressed by EG-1B. The group is comprised of government, original equipment manufacturers, and users dedicated to creating, preparing and maintaining all relevant specifications, standards and requirements for aerospace propulsion system support equipment.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.