This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Standard Electrical and Logical Interface for Airborne Fuzing Systems
- Aerospace Standard
- AS5716
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This interface standard applies to fuzes/fuzing systems (referred to as fuzing system hereafter) in airborne weapons that use a MIL-STD-1760 interface. It defines the powers, the discrete signals and the serial data interface for the communications at the interface between the fuzing system and the remainder of the weapon, including the weapon control unit, for Class 1 interfaces. Future issues of the standard will provide for additional fuzing system related functionality defined as Class 2 and Class 3 interfaces. For future issues of this standard, the connector definition is contained in AS5680.
This standard does not impose any safety requirements and does not supersede or replace any existing applicable safety standards.
Rationale
The Society for Automotive Engineers (SAE), AS-1 Technical Committee Aircraft Systems and System Integration, formed SAE AS-1B6, Fuze Systems Task Group, to generate an Aerospace Standard (AS) to support interoperability and interchangeability of airborne weapons and their fuzing systems. This effort was initiated in response to a request made to the SAE AS-1 Technical Committee by the North Atlantic Treaty Organization (NATO) Air Armament Panel for AS-1 to undertake a study or series of studies related to airborne weapons fuzing system standardization.
This standard addresses weapons using MIL-STD-1760, aircraft to weapon interfaces as this is the interface generally employed for all modern airborne weapons of NATO countries.
Recommended Content
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| TABLE 1 | ADDRESS BYTE | |
| TABLE 2 | CONTROL BYTES FOR THE FUZING SYSTEM SERIAL DATA INTERFACE | |
| TABLE 3 | WEAPON COMMANDS, SAFETY RELATED | |
| TABLE 4 | WEAPON COMMANDS, NON SAFETY RELATED | |
| TABLE 5 | WEAPON COMMANDS, FUZING SYSTEM SPECIFIC | |
| TABLE 6 | DATA CONTENT FOR MESSAGES WITH CONTROL BYTE “A” OR “M” | |
| TABLE 7 | “F” COMMAND DATA CONTENT | |
| TABLE 8 | “I” COMMAND DATA CONTENT | |
| TABLE 9 | FUZING SYSTEM RESPONSE CONTROL BYTES, SAFETY RELATED | |
| TABLE 10 | FUZING SYSTEM RESPONSE CONTROL BYTES, NON SAFETY RELATED | |
| TABLE 11 | FUZING SYSTEM RESPONSE CONTROL BYTES, FUZING SYSTEM SPECIFIC | |
| TABLE 12 | “q” FUZING SYSTEM RESPONSE DATA (ARMING TIMES) | |
| TABLE 13 | ARMING MODE BYTES 0 AND 1 DEFINITIONS | |
| TABLE 14 | “f” FUZING SYSTEM RESPONSE DATA (STATUS) | |
| TABLE 15 | “C” FUZING SYSTEM RESPONSE DATA (IDENTIFIER) | |
| TABLE 16 | “R” FUZING SYSTEM RESPONSE DATA (ERROR CODES) | |
| TABLE 17 | “s” FUZING SYSTEM RESPONSE DATA (SETTINGS) | |
| TABLE 18 | FUZING MODE 1 | |
| TABLE 19 | FUZING MODE 2 | |
| TABLE 20 | “U” FUZING SYSTEM RESPONSE DATA (CAPABILITIES) | |
| Unnamed Dataset 26 | ||
| Unnamed Dataset 27 | ||
| Unnamed Dataset 28 | ||
| Unnamed Dataset 29 | ||
| Unnamed Dataset 30 | ||
| Unnamed Dataset 31 | ||
| Unnamed Dataset 32 |
Issuing Committee
AS-1B Aircraft Store Integration Committee
The SAE AS-1 Aircraft Systems & Systems Integration committee addresses all facets of aircraft avionics systems design, maintenance, and in-service experience. It reviews and develops specifications for stores interface, validation requirements, systems integration, mission store validation plans and media terminal design. Also addressed are system test requirements, architecture, security and 1553 data bus standards. The group is comprised of three subcommittees dedicated to creating, preparing, and maintaining all relevant specifications, standards, and requirements for aircraft avionics systems. These subcommittees include:
AS-1A Avionics Networks AS-1B Aircraft-Store Integration AS-1C Avionic Subsystems Participants in the SAE AS-1 committee include OEMs, suppliers, aircraft avionics equipment companies, consulting firms, government and others across the aerospace and defense industries.Reference
| Number | Title |
|---|---|
| ANSI IEEE/ASTM SI 10 | This document is not part of the subscrption. |
| ANSIIEEE/ASTMSI | This document is not part of the subscrption. |
| ANSIX3.4 | This document is not part of the subscrption. |
| AOP-16 | This document is not part of the subscrption. |
| AOP-38 | This document is not part of the subscrption. |
| ISO3166-1 | This document is not part of the subscrption. |
| ISO7498 | This document is not part of the subscrption. |
| MIL-HDBK-1763 | This document is not part of the subscrption. |
| MIL-STD-1316 | This document is not part of the subscrption. |
| MIL-STD-1553 | This document is not part of the subscrption. |
| MIL-STD-1760 | This document is not part of the subscrption. |
| MIL-STD-704 | This document is not part of the subscrption. |
| STANG4187 | This document is not part of the subscrption. |
| TIA-485-A | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.