This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SPACER, SLEEVE - FOR .190 INCH BOLT, AMS4901 OR AMS4921
- Aerospace Standard
- AS3435
- Reaffirmed
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
AS3435 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
-
1
MATERIAL: TITANIUM ALLOY AMS4901 OR AMS4921
-
2
PROCUREMENT SPECIFICATION: MA1784.
-
3
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978, REQUIREMENTS PER ANSI B46.1-1978.
-
4
BREAK SHARP EDGES .003-.015.
-
5
DIMENSIONS AND TOLERANCING: ANSI Y14.5M-1982
-
6
DIMENSIONS IN INCHES.
-
7
DO NOT USE UNASSIGNED PART NUMBERS.
-
AS AND AMS ARE SAE PUBLICATIONS.
-
ANSI IS AMERICAN NATIONAL STANDARDS INSTITUTE PUBLICATION.
Recommended Content
Aerospace Standard | Stud, Locked in - Ring, Straight, Installation and Removal of |
Aerospace Standard | Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal of |
Aerospace Standard | SPACER, SLEEVE - FOR 5 MM BOLT, AMS4901 OR AMS4921, METRIC |
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
Number | Title |
---|---|
AMS4901 | TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield |
ANSI/ASME/B46.1 | This document is not part of the subscrption. |
ANSI/Y14.36 | This document is not part of the subscrption. |
ANSI/Y14.5M | This document is not part of the subscrption. |
AS478 | IDENTIFICATION MARKING OF ITEMS FOR AIRCRAFT POWER PLANTS |
AS478J | IDENTIFICATION MARKING METHODS |
MA1784 | Spacers and Washers, Procurement Specification For, Metric |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.