This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 5662, .3125-24UNJF-3A (STRESS RUPTURE RESISTANT)
- Aerospace Standard
- AS3419
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY.
-
1
FOR PART NUMBERS AS3419-03 THRU AS3419-08
IN TOL NOTE SHALL BE CHANGED TO
. -
2
MATERIAL: CORROSION AND HEAT RESISTANT NICKEL ALLOY AMS 5662.
-
3
MANUFACTURING SPECIFICATION: AMS 7467 EXCEPT ROLL THREAD AND COLD WORK FILLET RADIUS AFTER PRECIPITATION HARDENING.
-
4
FLUORESCENT PENETRANT INSPECTION PER AMS 2645.
-
5
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978; REQUIREMENTS PER ANSI B46.1-1978. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra. EXCEPT UPSET HEAD TO BE 250 MICROINCHES Ra.
-
6
BREAK SHARP EDGES .003-.015 UNLESS OTHERWISE SPECIFIED.
-
7
DIMENSIONS IN INCHES.
-
8
DIMENSIONS AND TOLERANCING ANSI Y14.5M-1982.
-
9
DO NOT USE UNASSIGNED PART NUMBERS.
Recommended Content
| Aerospace Standard | Stud, Locked in - Ring, Straight, Installation and Removal of |
| Aerospace Standard | RIVET-TUBULAR, COUNTERSUNK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N06600) |
| Aerospace Standard | BOLT, TEE HEAD – CHAMFERED, AMS5708 (UNS N07001), 165 KSI MIN UTS, .1900-32UNJF-3A |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.