This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
WASHER – FLAT LOAD SPREADING, METRIC, AMS5525
- Aerospace Standard
- AS3265
- Reaffirmed
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
AS3265 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
-
1
MATERIAL: AMS 5525.
-
2
DIMENSION "C" SHALL BE UNIFORM WITHIN 0.05.
-
3
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978. REQUIREMENTS PER ANSI B46.1-1978.
-
4
PARTS SHALL BE MARKED PER AS478 CLASS C, AS FOLLOWS:PART NO. AS3265-03 THRU AS3265-05 SHALL BE MARKED WITH MATERIAL CODE "EH19".PART NO. AS3265-06 THRU AS3265-20 SHALL BE MARKED WITH PART NO. AND MANUFACTURERS' IDENTIFICATION.MULTIPLE MARKING PERMISSIBLE PROVIDED POSITIVE IDENTIFICATION IS SHOWN ON EACH PART.
-
5
REMOVE BURRS AND SHARP EDGES.
-
6
DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE SPECIFIED.
-
7
DIMENSIONING AND TOLERANCING: ANSI Y14.5-1973.
-
8
DO NOT USE UNASSlGNED PART NUMBERS.
Recommended Content
Ground Vehicle Standard | DEEMBRITTLEMENT VERIFICATION TEST |
Aerospace Standard | SCREW – OVAL FILLISTER DRILLED HEAD, .164-32 |
Aerospace Standard | BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .2500-28 UNJF-3A |
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.