HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO 90°
- Aerospace Standard
CONSTRUCTION AND PERFORMANCE: THESE HOSE ASSEMBLIES SHALL MEET THE CONSTRUCTION AND PERFORMANCE REQUIREMENTS OF AS 1472. FITTINGS SHALL BE PERMANENTLY ATTACHED TO THE HOSE.
RATED OPERATING CHARACTERISTICS: PER AS 1472. OPERATING TEMPERATURE: TYPE II −65°F TO +275°F (-54°C TO +135°C) TYPE III −40°F TO +160°F (-40°C TO +71°C) OPERATING PRESSURE: 125PSI MAX.
MATERIALS AND FINISH: PER AS 1472
FUNCTIONAL TEST AND CLEANING: PER AS 1472
MARKING: THE HOSE ASSEMBLIES SHALL HAVE ALL IDENTIFICATION MARKING AS REQUIRED BY AS 1472, IMPRESSION STAMPED ON AN ALUMINUM ALLOY BAND NOT MORE THAN 1.0 INCH WlDE. ANOOIZED BLACK. THE CHARACTERS SHALL BE 1/16 INCH HIGH, EXCEPT THE “AS” PART NUMBER WHICH SHALL BE 1/8 INCH HIGH CHARACTERS. THE BAND SHALL BE TIGHT ON THE HOSE BUT WITHOUT PINCHING. AND ENCOMPASS A MINIMUM OF 340 DEGREES OF THE HOSE PERIPHERY. THE BAND SHALL BE SUFFICIENTLY STRONG TO PREVENT REMOVAL BY HAND, BUT ALLOW REPOSITIONING ON THE HOSE WITH THE AID OF A STANDARD SCREWORIVER, VARIABLE DATA, SUCH AS MANUFACTURING DATE AND “PT” SYMBOL MAY BE ELECTROETCHED ON ONE END FITTING.
PROCUREMENT SPECIFICATION: PER AS 1472, TYPE II AND TYPE III
Data Sets - Support Documents
|Unnamed Dataset 3|
|Unnamed Dataset 4|
This Committee is responsible for developing and maintaining standards for design, test, and procurement of fluid systems part standards to improve reliability and economy. Their primary focus is on AS standards development and support of military standards. The Committee also develops ISO standards in a Subcommittee Advisory Group (SCAG) to ISO/TC 20/SC 10, and SAE-MA derivatives thereof.Structure: SAE G-3 -- Parent committee SAE G-3A -- Aerospace Couplings Subcommittee SAE G-3B -- Aerospace Fittings Subcommittee SAE G-3D -- Aerospace Hose Subcommittee SAE G-3E - Aerospace Tubing Assemblies Subcommittee U.S. SCAG to ISO/TC 20/SC 10 -- ISO standards Major projects: Support of Military Standards Reform Support of military standard conversions to MIL-PERF and MIL-DTL. Development of AS replacements for military standards designated for conversion. Establish document to list G-3 accepted replacements for replaced part standards and military back-up specifications. Development of PRI QML/QPL Development of Performance Review Institute (PRI) process for approval and surveillance of manufacturers (Qualified Manufacturer List, QML) and for approval of standard parts as qualified for use (Qualified Parts List, QPL). Development of ISO Standards, Imperial Units ISO/TC 20/SC 10 standards have typically been developed in SI units. The ISO has approved development of inch-based ISO standards to support commercial aviation. Basic design, test, and procurement specifications will be selected from military standards that are to be converted to Non-Government standard (NGS) and developed as ISO standards.
|AS1472||HOSE ASSEMBLY, LOW PRESSURE, FLARELESS, POTABLE WATER|
|NAS1760||This document is not part of the subscrption.|