This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Test Methods for Electrical Connectors
- Aerospace Standard
- AS13441
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This standard establishes uniform test methods for testing electrical connectors.
Recommended Content
Ground Vehicle Standard | Blade Fuses - 42 V System |
Aerospace Standard | Portable Measuring Devices/Systems for Maintenance Troubleshooting of Aircraft Cabin and Flight Deck Air Quality Issues |
Ground Vehicle Standard | STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS |
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
TABLE I | Cross reference equivalent test methods. | |
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
TABLE I | Temperature cycling. | |
TABLE II | Exposure time at temperature extremes. | |
TABLE I | Connector temperatures. | |
TABLE II | Length of test. | |
Unnamed Dataset 13 | ||
TABLE I | Hydrostatic pressure test increments (static). | |
TABLE I | Firewall test currents. | |
TABLE I | Test conditions. | |
TABLE II | Flame and after-glow extinguishing time. | |
TABLE I | Temperature limits for use in test cycles. | |
TABLE II | Pressure level. | |
TABLE I | Test fluids and cycles. | |
TABLE I | Samples. | |
TABLE II | Corrosion products. | |
TABLE I | Test condition values. | |
TABLE I | Vibration conditions. | |
TABLE II | Values for test-condition V | |
TABLE III | Values for test-condition VI | |
TABLE I | Cable pull-out test loads. | |
TABLE I | Acceleration levels. | |
TABLE I | Drop height and number of drops. | |
TABLE I | Test voltage at sea level. | |
TABLE I | Test conditions. | |
TABLE A-1 | Sample dimensions for mode-stirred chamber | |
TABLE B-I | Data for constructing impedance matching taper | |
TABLE B-II | Data for constructing impedance matching taper | |
TABLE B-III | Data for constructing impedance matching taper | |
TABLE C-I | Example of converting generalized dimensions to actual dimensions: d = 0.5 m |
Issuing Committee
SAE Subcommittee AE-8C1, Connectors, shall be associated with those activities directed by the parent SAE Aerospace Council and the SAE Aerospace Electronics and Electrical Distribution Systems Committee, for the development and application of electrical optical connector and associated hardware standards and specifications. SAE Subcommittee shall also serve the needs of the Navy, Army, and Air Force through the establishment and maintenance of User Advisory Committees.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.