This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
- Aerospace Material Specification
- AMS4083M
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers an aluminum alloy in the form of seamless round tubing with wall thickness from 0.025 to 0.500 inch (0.64 to 12.70 mm), inclusive (see 8.6).
Rationale
AMS4083M revises properties (3.3), reports (4.4) and identification (5.1.1), and results from a Five-Year Review and update of this specification.
Recommended Content
| Aerospace Material Specification | Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg – 0.25Cr (5052-O) Annealed |
| Aerospace Standard | ELBOW, BULKHEAD UNIVERSAL 90°, FLARELESS TUBE |
| Aerospace Material Specification | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Table 1 | Composition | |
| Table 2A | Minimum tensile properties, inch/pound units | |
| Table 2B | Minimum tensile properties, SI units | |
| Table 3A | Flarability requirements, inch/pound units | |
| Table 3B | Flarability requirements, SI units |
Issuing Committee
AMS D Nonferrous Alloys Committee
The committee of Nonferrous Alloys, AMS Committee D, shall prepare, coordinate, and revise documents related to nonferrous metals technology, such as aluminum, magnesium, and copper, through the participation of metals suppliers, users, and interested government agencies. Committee activities shall provide a forum for the cooperative interchange of ideas and experience of the participants, resulting in the publication of specifications that embody sound, established aerospace industry practices and requirements to serve the suppliers and customers of aerospace materials.
Reference
| Number | Title |
|---|---|
| AMS2355 | TENSILE TESTING OF WROUGHT ALUMINUM AND MAGNESIUM PRODUCTS Except Forgings |
| AMS2772 | HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
| ANSIH35.2 | This document is not part of the subscrption. |
| ANSIH35.2M | This document is not part of the subscrption. |
| ASTMB660 | This document is not part of the subscrption. |
| ASTMB666/B666M | This document is not part of the subscrption. |
| ASTME215 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.