This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
- Aerospace Material Specification
- AMS2241S
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers established manufacturing tolerances applicable to corrosion and heat-resistant steel, iron alloy, titanium, and titanium alloy bars and wire. These tolerances apply to all conditions, unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range.
Rationale
AMS2241S revises tolerances for machined bars (2.1.4, Table 3), clarifies the intent of precision ground or precision polished rounds (2.1.6, Table 5), and is a Five Year Review and update of this specification.
Recommended Content
| Aerospace Material Specification | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation-Hardenable |
| Aerospace Material Specification | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) |
| Aerospace Material Specification | Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Table 1A | Tolerances, diameter or thickness, inch/pound units | |
| Table 1B | Tolerances, diameter or thickness, SI units | |
| Table 2A | Tolerances, thickness and width, inch/pound units | |
| Table 2B | Tolerances, thickness and width, SI units | |
| Table 3A | Tolerances, machined or turned bars, inch/pound units | |
| Table 3B | Tolerances, machined or turned bars, SI units | |
| Table 4A | Tolerances, centerless-ground or polished bars, inch/pound units | |
| Table 4B | Tolerances, centerless-ground or polished bars, SI units | |
| Table 5A | Tolerances, precision ground or precision polished rounds, inch/pound units | |
| Table 5B | Tolerances, precision ground or precision polished rounds, SI units | |
| Table 6A | Tolerances, diameter or thickness, inch/pound units | |
| Table 6B | Tolerances, diameter or thickness, SI units | |
| Table 7A | Tolerances, thickness, inch/pound units | |
| Table 7B | Tolerances, thickness, SI units | |
| Table 8A | Tolerances, diameter or thickness, inch/pound units | |
| Table 8B | Tolerances, diameter or thickness, SI units | |
| Table 9A | Tolerances, thickness, inch/pound units | |
| Table 9B | Tolerances, thickness, SI units | |
| Table 10A | Tolerances, thickness, inch; for thickness ranges, inches, inch/pound units | |
| Table 10B | Tolerances, thickness, millimeters; for thickness ranges, millimeters, SI units | |
| Table 11A | Tolerances, width, inch/pound units | |
| Table 11B | Tolerances, width, SI units | |
| Table 12A | Tolerances, length, inches, plus only; for length ranges, feet, inch/pound units | |
| Table 12B | Tolerances, length, millimeters, plus only; for length ranges, millimeters, SI units | |
| Table 13A | Tolerances, length, inch, plus only; for length ranges, feet, inch/pound units | |
| Table 13B | Tolerances, length, millimeters, plus only; for length ranges, millimeters, SI units | |
| Table 14A | Minimum distance across corners, inch/pound units | |
| Table 14B | Minimum distance across corners, SI units |
Issuing Committee
AMS F Corrosion Heat Resistant Alloys Committee
The committee of Corrosion and Heat Resistant Steels and Alloys and Specialty Steels and Alloys, AMS Committee F, will prepare, coordinate, and revise documents related to corrosion and heat resistant steels and alloys and specialty steels and alloys technology, such as stainless steels and nickel and base alloys, through the participation of metals suppliers, users, and interested government agencies. Committee activities shall provide a forum for the cooperative interchange of ideas and experience of the participants, resulting in the publication of specifications that embody sound, established aerospace industry practices and requirements to serve the suppliers and customers of aerospace materials.
Reference
| Number | Title |
|---|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.