This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Ceramic Catalyst Supports and Particulate Filters for Diesel Engine Exhaust Aftertreatment
Annotation ability available
Sector:
Language:
English
Abstract
The engine exhaust aftertreatment needs for diesel heavy duty vehicles and passenger cars will be reviewed.
A short discussion on current engine based emission reduction technologies will lead to the description of after treatment technologies. The predominant technologies applied are oxidation catalysts for both passenger cars as well as heavy duty trucks and busses. The oxidation catalyst utilizes a large frontal area, flow-through ceramic substrate to remove the SOF, HC, and CO emissions. High efficiency particulate matter removal can be achieved with the use of ceramic diesel particulate filters.
The properties and performance data of flow-through substrates as well as particulate traps will be discussed in the paper
Recommended Content
Topic
Citation
Cash, T., Willians, J., and Zink, U., "Ceramic Catalyst Supports and Particulate Filters for Diesel Engine Exhaust Aftertreatment," SAE Technical Paper 982927, 1998, https://doi.org/10.4271/982927.Also In
References
- California's Air Toxics Program 3 Draft report Feb. 1998
- Bauder, R. et al 1997 10 620
- Peters, A. et al 1997 760
- Stumpp G. 1998 U. Essers (Publ.), Expert Verlag 1998
- Leyrer et al “Advanced Studies on Diesel Aftertreatment Catalyst for Passenger Cars” SAE 960133 1996
- Lauga et al. “Application Strategies of Lean NOx Catalysts Systems to Diesel Passenger Cars” Proc. Of 6. Aachener Motorenkolloquium 1997
- Quissek, F. et al. “The Influence of Fuel Sulphur Content on the Emissions Characteristics of Passenger Cars” Proc. Of 19. Wiener Motorensymposium Wien 1998
- Kraemer, M. et al. “Possible Exhaust Gas Aftertreatment Concepts for Passenger Car Diesel Engines with Sulphur-free Fuel” Proc. Of 19. Wiener Motorensymposium Wien 1998
- Jacob E. et al. “Reduction of NOx from HD Diesel Engines with Urea SCR Compact Systems (Controlled Diesel Catalyst)” Proc. Of 19. Wiener Motorensymposium Wien 1998
- Aust M. et al. “Exhaust gas Aftertreatment System to Meet EuroIV Emission Standards for Diesel Passenger Cars” Proc. Of 19. Wiener Motorensymposium Wien 1998
- Lueders, H. et al. “Applications for Regeneration of Diesel Particulate Traps by Combining Different Regeneration Systems” SAE 970470 1997
- Hawker, P.N. et al. “Effect of a Continuously Regenerating Trap on Non-regulated Emissions and particle Size Distribution” SAE 980189 1998
- Lueders, H. et al. “Diesel Particulate Filter - Potential and Prospects of Advanced Filtering Materials for Future Aftertreatment Systems” 1998
- Gulati. S.T. McLean, R.O. Murtagh, M.J. “Ceramic Solution for Diesel Exhaust Aftertreatment” 2 nd SIAT Conference December 1996
- Murtagh, M.J. Sherwood, D.L. Socha, L.S. Jr. “Development of a Diesel Particulate Filter composition and its Effect on Thermal Durability and Filtration Performance” SAE Paper No. 940235 1994
- Johnson, J.H. Bagley, S.J. Gratz, L.D. Leddy, G.D. “A Review of Diesel Particulate Control Techology and Emisions Effect” SAE Paper No. 940233 1994
- Baum, K.J. Johnson, J.H. “The Effect of Low sulfur Fuel on Diesel Exhaust Particle Size Distribution” SAE Transactions 102 691 699 1992
- Mayer, A. Engli, H. Burtacher, H. Czerwinski, J. Gehring, D. “Particle Size Distribution Downstream Trap of Different Design” SAE paper No. 950373 1995
- Health Asement Document for Diesel Emissions SAB Review Draft EPA/600/8-90/057C February 1988