This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Force and Moment Properties of a Small Sample of Tire Specifications: Drive, Steer, and Trailer with Evolution from New to Naturally Worn-Out to Retreaded Considered
Annotation ability available
Sector:
Language:
English
Abstract
The free-rolling cornering, straight-line braking, and pull force properties of a small sample of tire specifications is examined. This is done to examine potential differences between the specifications and the statistics of force and moment measurements. Two steer axle specifications, two drive axle specifications, and a trailer specification are considered, In addition, the evolution of properties for one drive axle specification is followed from new to naturally worn-out to retreaded. The summarized data is available from SAE Cooperative Research on electronic media.
Authors
Citation
Pottinger, M., Pottinger, D., Pelz, W., Winkler, C. et al., "Force and Moment Properties of a Small Sample of Tire Specifications: Drive, Steer, and Trailer with Evolution from New to Naturally Worn-Out to Retreaded Considered," SAE Technical Paper 982748, 1998, https://doi.org/10.4271/982748.Also In
References
- Statement of Work Truck Tire Characterization Phase 1 Part 2 SAE Cooperative Research Warrendale, PA April 6 1995
- Pottinger M. G. Pelz W. Tapia G. Winkler C. B. “A Free-Rolling Cornering Test for Heavy Duty Truck Tires,” Tire Science and Technology 24 2 April-June 1996 153 180
- Pottinger M. G. Tapia G. A. Winkler C. B. Pelz W. “A Straight-Line Braking Test for Heavy Duty Truck Tires,” ACS Rubber Division Cleveland, OH Rubber World 214 6 September 1996 29 36
- Pottinger M. G. Pelz W. Tapia G. A. Winkler C. B. “A Combined Cornering and Braking Test for Heavy Duty Truck Tires,” 4th International Symposium on Heavy Vehicle Weights and Dimensions University of Michigan Ann Arbor, MI June 25-29 1995 583 592
- Pottinger M. G. Pelz W. Falciola G. “Effectiveness of the Slip Circle, ‘COMBINATOR’, Model for Combined Tire Cornering and Braking Forces When Applied to a Range of Tires,” SAE 982747 SAE Warrendale, PA 1998
- 1998 Year Book The Tire and Rim Association, Inc. 175 Montrose West Ave. Suite 150, Copley, OH 44321 1998
- Pottinger M. G. Pelz W. Pottinger D. M. Winkler C. B. “Truck Tire Wet Traction: Effects of Water Depth, Speed, Tread Depth, Inflation, and Load,” SAE 962153 SAE Warrendale, PA 1996
- “Truck Tire Characterization,” SAE Cooperative Research Report SAE Warrendale, PA December 1995
- Whitehurst E. A. Neuhardt J. B. “Time-History Performance of Reference Surfaces,” The Tire Pavement Interface Pottinger M. G. Yager T. J. American Society for Testing Materials Philadelphia, PA 1986 61 71
- “Statement of Work, Truck Tire Characterization, Phase 1 Part 2,” SAE Warrendale, PA April 6 1995
- Schuring D. J. Pelz W. Pottinger M. G. “A Model for Combined Tire Cornering and Braking Forces, ” SAE 960180 SAE Warrendale, PA 1996
- SAE J1988 “Residual Aligning Moment Test” SAE Warrendale, PA August 1994
- Pottinger M. G. “Tire/Vehicle Pull: An Introduction Emphasizing Plysteer Effects,” Tire Science and Technology TSTCA 18 3 July-September 1990 170 190
- Pottinger M. G. Pelz W. “Recommended Test Sample Sizes (SOW 1.5) and The CALSPAN/UMTRI Comparison (SOW 3.0) for 1.2.1 Data,” SAE CRP-11 SAE Warrendale, PA December 1995
- Pottinger M. G. Pelz W. “Recommended Test Sample Sizes (SOW 1.5) and The CALSPAN/UMTRI Comparison (SOW 3.0) for 1.2.2 Data,” SAE CRP-11 SAE Warrendale, PA December 1995
- Burke R. J. Robertson J. D. Sayers M. W. Pot-tinger M. G. “Example Utilization of the Truck Tire Characteristics Data in Vehicle Dynamics Simulation Environment,” SAE 982746 SAE Warrendale, PA 1998