This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Collaborative Research Center SFB 362 “Sheet Metal Technology” - Processes for Production and Applications
Annotation ability available
Sector:
Language:
English
Abstract
Because of the increasing demand of lightweight construction, sheet-metals made from conventional and high-tensile steels or aluminum were developed to be a high-quality semi-finished product with a wide range of properties. Thus it was made possible to access extended and innovative techniques for the processing of sheet-metal components with complex design, such as tailored blanks, and to realize load-optimized component properties. The supposition for material-specific processing is provided by a close cooperation of a material-related and product-orientated fundamental research. Since 1993, such an interacting research-partnership between the Technical Universities of Clausthal and Hannover in Germany is represented by a “Collaborative Research Center SFB 362” titled “Sheet-Metal Technology - Processes for Production and Applications”. The SFB 362 combines the various engineering disciplines, in particular deep-drawing- and welding, materials-science,-testing, measurement and sensoring as well as design and organizational tasks in a joint scientific research project.
Authors
Citation
Draugelates, U., Hillebrecht et al., M., and Doege et al., E., "Collaborative Research Center SFB 362 “Sheet Metal Technology” - Processes for Production and Applications," SAE Technical Paper 982373, 1998, https://doi.org/10.4271/982373.Also In
References
- Kruska, J.-U. 9 1997
- Doege, E. Griesbach, B. Schulz-Marner, H. “Adaptive Werkzeugkonzepte zur Umformung von gefügten Halbzeugen” Fellbach 1997
- Bäuerle, H.-P. Steininger, V. “Neue Lösungen mit Stahl beim Automobil-Leichtbau” 1264 1996
- Tanaka, A. “Jüngste trends in der Werkstoffentwicklung für den Automobilbau” Bulletin of the iron and steel institute of Japan 1 1996
- Bloeck, M. Furrer, P. “Beschichtetes Aluminiumkarosserieblech - Vorteile und Grenzen in Theorie und Praxis” 96 14 1996
- Doege, E. Dohrmann, H. El-Dsoki, T. Kösters, R. “Constitutive Equations for the Simulation of Sheet Metal Forming Processes Using the FEM” Vortrag Proc, of the 6th Cairo University Conf. On Mech. Design and production 1996
- Drewes, E.-J. Beenken, H. Engl, B. Lenze, F.-J. Wolfhard, D. “Innovative Stahlprodukte für den Leichtbau” 2 1995
- Draugelates, U. König, K.-H. “Untersuchungen zum Laserstrahlschweißen oberflächenveredelter Aluminiumbleche” 47 1995
- Doege, E. Dohrmann, H. Neubauer, I. “Numerische Simulation von Gefügeumwandlungen” 42 1995
- Beenken, H. Engl, B. Filthaut, C. Lenze, F.-J. Schuhmacher, B. Wolfhard, D. Wormuth, R. “Der Einsatz oberflächenveredelter Stahleinbleche im Karosseriebau” 1995
- Draugelates, U. Bouaifi, B. Sommer, D. Tönshoff, K. H. Karpuschewski, B. Oberbeck, I. “Einfluß verschiedener Wärmenachbehandlungsverfahren auf den Eigenspannungszustand quetschnahtgeschweißter Feinblechhalbzeuge” 1995
- Seto, K. Okuda, K. Sakata, K. “High formable ultra low carbon high strength sheet steels for automotive body panels” Technical research division Kawasaki steel corporation 1994
- Draugelates, U. Bouaifi, B. Sommer, D. Seibert, D. “Simulation of the forming of mash seam welded sheets” Steel research 65 1994
- Bouaifi, B. Sommer, D. “Einfluß der Fügetechnik auf Mikrostruktur und Umformbarkeit von Stahlfeinblechen” 46 1994
- Schulze, K. R. “Elektronenstrahlschweißen unter Atmosphärendruck” 46 1994
- Schepis, R. J. Matlock, D. K. Krauss, G. “Formability of high strength interstitial-free steel sheet” International Symposium of low carbon steels for the 90's The minerals, metals & materials society 1993
- Haferkamp, H. Bach, Fr.-W. Kinzel, A. “Laserstrahlschweißen von innovativen Stahlfeinblechen” 1072 1993
- Freier, K. Kruska, J.-U. Schroeder, M. Stock, G. “Neues höherfestes Feinblech für den Einsatz im Automobilbau, b) Neue Blechkennwerte” Hannover 1993
- Behler, K. Imhoff, R. Beyer, E. Hamkens, J. Henke, B. Singh, S. “Laserstrahlschweißen von Karosserieblechen. Ermittlung der mechanisch-technologischen Eigenschaften” 146 1992
- Draugelates, U. Kolleck, M. “Fertigen in Feinblech” 1992
- Zimnik, W. Freier, K. “Entwicklung neuartiger höherfester Feinbleche für den Einsatz im Karosseriebau” 1990
- Ivanov, V. N. Turzhitskii, N. V. Betrov, A. R. “Untersuchung des Stauchvorganges beim HochfrequenzStumpfschweißen von Stählen” 3 1989
- “Lineares Hochfrequenzschweißen” Augsburg