This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Why P/M Provides the Advantage
Annotation ability available
Sector:
Language:
English
Abstract
In conventional powder metallurgy (P/M), structural stainless steel parts are produced by pressing alloy powder of the appropriate composition in a die to produce a compact. The compact is then sintered at an elevated temperature in a controlled atmosphere, bonding the particles together by diffusion and densifying the part. In this paper the P/M process is reviewed and its capabilities are discussed. Following this, the more common stainless steel compositions are detailed and the advantages of the P/M process are summarized.
Recommended Content
Authors
Citation
Reinshagen, J., "Why P/M Provides the Advantage," SAE Technical Paper 980310, 1998, https://doi.org/10.4271/980310.Also In
References
- Shah Suresh O. et al “On the Real Life Performance of Sintered Stainless Steel ABS Sensor Rings” SAE Technical Paper 970423 SAE International Congress and Exposition Detroit, MI February 24-27 1997
- Lee Pamela “Requirements for Automotive Engine Applications for Stainless Steel P/M Materials” MPIF P/M Stainless Steel/Corrosion Resistant Materials and Coatings Short Course Raleigh, NC April 23-24 1996
- Hubbard Ted et al “Performance of Stainless Steel P/M Materials in Elevated Temperature Applications” SAE Technical Paper 970422 SAE International Congress and Exposition Detroit, MI February 24-27 1997
- Albee Tanya R. et al “Enhanced Powder Metal Materials for Exhaust System Applications” SAE Technical Paper 970281 SAE International Congress and Exposition Detroit, MI February 24 - 27 1997
- Baran Michael C. et al “P/M Ferritic Stainless Steels for Exhaust System Components” SAE Technical Paper 970282 SAE International Congress and Exposition Detroit, MI February 24 - 27 1997
- Lee Pamela F. et al “How P/M Meets Automotive Exhaust System Future Performance Requirements” SAE Technical Paper 980311 SAE International Congress and Exposition Detroit, MI February 23 - 26 1998
- Clase Scott M. Sanderow Howard I. “High Density Stainless Steel P/M and its Effect on System Performance Requirements” SAE Technical Paper 980312 SAE International Congress and Exposition Detroit, MI February 23 - 26 1998
- Cimino Tina M. et al “Applications of P/M Components in Automotive Exhaust Systems” SAE Technical Paper 980313 SAE International Congress and Exposition Detroit, MI February 23 - 26 1998
- Shah Suresh et al “Development of P/M Stainless Steel for Automotive Exhaust System Applications” SAE International Conference and Exposition Detroit, MI February 23 - 26 1998
- Klar Erhard Fesko James W. “Gas and Water Atomization” Metals Handbook 9th 7 American Society for Metals Metals Park, OH 1984 25 26
- Lawley Alan “Modern Powder Metallurgy Science and Technology” Journal of Metals 38 8 1986 15 25
- German Randall M. Powder Metallurgy Science Second Metal Powder Industries Federation Princeton, NJ 1994 211
- Powder Metallurgy Design Manual Second Metal Powder Industries Federation Princeton, NJ 1995 92
- Powder Metallurgy Design Manual Second Metal Powder Industries Federation Princeton, NJ 1995 94
- Powder Metallurgy Design Manual Second Metal Powder Industries Federation Princeton, NJ 1995 98 104
- Hamill, Jack A. Jr. et al “Fusion Welding P/M Components for Automotive Applications” SAE Technical Paper 930490 SAE International Congress and Exposition Detroit, MI March 1 - 5 1993
- Halldin G. W. et al “Welding of 316L P/M Stainless Steel” Progress in Powder Metallurgy 39 1983 267 280
- Powder Metallurgy Design Manual Halldin G. W. et al “Welding of 316L P/M Stainless Steel” Progress in Powder Metallurgy 39 1983 23 38
- MPIF Standard 35, Materials Standards for P/M Structural Parts Metal Powder Industries Federation Princeton, NJ 1997 22 23