This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On the Importance of Non-Newtonian Effects in Journal Bearing Lubrication: A Numerical Approach
Annotation ability available
Sector:
Language:
English
Abstract
Continuing interest in energy conservation and friction reduction, driven primarily by environmental concerns, provides opportunities to develop energy saving lubricants. The greatest potential energy savings come from reductions in hydrodynamic friction as typified by main and connecting rod journal bearings in automotive engines. The main approach to minimise friction losses in these bearings is to reduce the lubricant viscosity. However, this approach will inevitably reduce oil film thickness and impose even higher stresses on the lubricant. The problem is compounded by the use of multigrade oils, which contain relatively high molecular weight polymeric components, and exhibit both temporary and permanent shear thinning. Thus these lubricants exhibit non-Newtonian flow behaviour under the extreme conditions imposed by engine bearings. One of the fascinating, largely unresolved, questions in Tribology concerns the effect of non-Newtonian lubricant behaviour on lubrication characteristics and bearing performance. To model the performance of bearing-lubricant systems requires a knowledge of the rheology of multigrade lubricants combined with a method of estimating the bearing kinematics and dynamics involved for operation under in-service conditions. In a collaborative project involving the University of Wales Institute of Non-Newtonian Fluid Mechanics at Aberystwyth and Shell Research and Technology Centre, Thornton, UK this problem has been elucidated.
This paper presents an overview of the newly developed sophisticated numerical methods to model journal bearings. It will also demonstrate the importance of taking proper consideration of non - Newtonian lubricant rheology into account for applicability to engine journal bearings.
Recommended Content
Technical Paper | The Importance of Friction Modifiers in the Formulation of Fuel Efficient Engine Oils |
Technical Paper | Wear Mechanisms in Moderate Temperature Gasoline Engine Service |
Technical Paper | Lubrication, Tribology & Motorsport |
Authors
Citation
Walters, K., Bates, T., Coy, R., and Williamson, B., "On the Importance of Non-Newtonian Effects in Journal Bearing Lubrication: A Numerical Approach," SAE Technical Paper 972863, 1997, https://doi.org/10.4271/972863.Also In
References
- Bates, T.W. Fantino, B. Launay, L. Frene, J. “Oil Film Thickness in an Elastic Connecting Rod Bearing: Comparison between Theory and Experiment” STLE Trib. Trans. 33 1990 2 254 266
- Olson, D.H. “Relationship of Engine Bearing Wear and Oil Rheology” SAE Paper No. 872128 1987
- Bates, T.W. Williamson, B.P. Sperot, J.A. Murphy, C.K. “A Correlation Between Engine Oil Rheology and Oil Film Thickness in Engine Journal Bearings” SAE Paper No. 860376 1986
- Hutton, J.F. Jackson, K.P. Williamson, B.P. “The Effects of Lubricant Rheology on the Performance of Journal Bearings” 1984
- Williamson, B.P. “Enhancement of Journal Load Bearing Capacity by Polymer Containing Oils” SAE Paper No. 971697
- Scales, L. E. Davies, A.R. Gwynllyw, D. R.h. Phillips, T.N. Tasche, T. Williamson, B.P. “The Effect of Lubricant Rheology on the Performance of Dynamically Loaded Journal Bearings” SAE fall Fuels and Lubes meeting Tulsa, OK 1997
- Davies A.R. Li X.K. “Numerical Modelling of Pressure and Temperature Effects in Viscoelastic Flow between Eccentrically Rotating Cylinders” Jour. Non Newt. Fluid Mech. 54 331 350 1994
- Hutton, J.F. Jones B. Bates, T.W. “Effects of Isotropic Pressure on the High Temperature High Shear Viscosity of Motor oils” SAE Paper No. 830030 1983
- Barnes, H.A. Hutton, J.F. Walters, K. “An Introduction to Rheology” Elsevier 1989
- Williamson B.P. Milton A. “Characterisation of the Viscoelasticity of Engine Lubricants at Elevated Temperatures and Shear Rates” SAE Paper No. 951032
- Ellis, J. “Ultrasonic and Viscoelastic Studies at different Pressures” Univ. of Salford U.K. 1976
- Bair, S. “Normal stress difference on liquid lubricants sheared under high pressure” Rheol Acta 35 13 13 23 1996
- Mackley Private Communication to KW
- Crochet Walters “Endeavour” 17 1993 64 77
- Davies A.R. Xi. Li “Numerical Modelling of Pressure and Temperature Effects in Viscoelastic Flow between Eccentrically Rotating Cylinders” Jour. Non Newt. Fluid Mech. 54 331 350 1994
- Gwynllyw, D. Rh. Davies, A.R. Phillips, T.N. “A Moving Spectral Element Approach to the Dynamically Loaded Journal bearing Problem” J. Comp. Physics 123 476 494 1996
- Gwynllyw, D. Rh. Davies, A.R. Phillips, T.N. “On the Effects of a Non-Newtonian Lubricant on the Dynamics if a Journal Bearing” J. Rheology 40 6 1239 1265 1996
- Cameron, A. “Basic Lubrication Theory” Ellis Horwood 1981
- Brindley J. Elliott L. McKay J.T. “The role of cavitation in whirl instability in a rotor bearing: Part 1: The π-film model” ASME Journal of Applied Mechanics 50 1983 877 885
- Roberts, G.W. Walters, K. Rheol. Acta 31 1992 55 62