This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Confined Vibrations on Sensor and Actuator Optimization
Annotation ability available
Sector:
Language:
English
Abstract
The purpose of this paper is twofold. First, to report on a preliminary study conducted to determine the effect of confined vibrations on the sensor and actuator optimization based on their location and number. Second, to introduce a preliminary design methodology to incorporate confined vibrations in the design stage of the sensor/actuator arrays used in smart structures. It is clearly demonstrated that confinement has a significant impact on the optimization of sensors and actuators. The proposed optimization procedure and design methodology are proven to be effective in addressing some of the important issues surrounding this subject.
Authors
Citation
Shih, Y., Tarnowski, D., and Allaei, D., "Influence of Confined Vibrations on Sensor and Actuator Optimization," SAE Technical Paper 971890, 1997, https://doi.org/10.4271/971890.Also In
References
- Schulz, G. Heimbold, G. “Dislocated Actuator/Sensor Positioning and Feedback Design for Flexible Structures,” J. of Guidance 6 5 361 367 1983
- Kondoh, S. Yatomi, C. Inoue, K. “The Positioning of Sensors and Actuators in the Vibration Control of Flexible Systems,” JSME International Journal 33 2 145 152 1990
- Skelton, R. E. Hughes, P. C. “Modal Cost Analysis for Linear Matrix-Second-Order Systems,” J. of Dyn. Sys., Meas. and Control 102 151 158 1980
- Skelton, R. E. “Cost Decomposition of Linear Systems with Application to Model Reduction,” International Journal of Control 32 6 1031 1055 1980
- Yousuff, A. Skelton, R. E. “Controller reduction by Component Cost Analysis,” IEEE Transactions on Automatic Control AC-29 6 520 530 1984
- Moore, B.C. “Principal Component Analysis in Linear Systems: Controllability, Observability, and Model Reduction,” IEEE Transactions on Automatic Control AC-26 1 17 32 1981
- Viswanathan, C. N. Longman, R. W. Likins, P. W. “A Degree of Controllability Definition: Fundamental Concepts and Application to Modal Systems,” J. of Guidance 7 2 222 230 1984
- Viswanathan, C. N. Longman, R. W. Likins, P. W. “A Definition of the Degree of Controllability - A Criterion for Actuator Placement,” 2nd VPI&SU/AIAA Symposium on Dynamics and Control of Large Flexible Spacecraft Blacksburg, VA 369 384 1979
- Lindberg, R. E. Longman, R. W. “The Influence of Time an Normalization on Actuator Placement by Degree of Controllability,” AAS/AIAA Astrodynamics Specialist conference Lake Placid, NY 1983
- Lindberg, R. E. Longman, R. W. “Optimization of Actuator Placement via Degree of Controllability Criteria Including Spillover Considerations,” AIAA/AAS Paper 82-1435 San Diego, CA 1982
- Hamdan, A. M. A. Nayfeh, A. H. “Measures of Modal Controllability and Observability for First- and Second-Order Liner System,” J. of Guidance 12 3 421 428 1989
- Hac, A. Liu, L. “Sensor And Actuator Location in Motion Control of Flexible Structures,” Journal of Sound and Vibration 167 2 239 261 1993
- Allaei, D. “Application of Localized Vibration and Smart Materials in Controlling the Dynamic Response of Structures, Part V: Sensor and Actuator Optimization,” DARPA semi-annual report May 1996
- Rao, S. S. “Optimization - Theory and Applications,” second John Wiley & Sons 1986
- Fletcher, R. Powell, M.J.D. “A rapidly convergent descent method for minimization,” Computer Journal 6 2 163 168 1963
- Allaei, D. “Application of Localized Vibration and Smart Materials in Controlling the Dynamic Response of Structures, Part III,” 1994
- Allaei, D. “Application of Localized Vibration and Smart Materials in Controlling the Dynamic Response of Structures, Part IV 1995
- Allaei, D. “Vibration Control by Confinement: An Overview” 4 th International Congress on Sound and Vibration St. Petersburg, Russia June 1996
- Allaei, D. “Passive and Active Vibration Control by Confinement: An Overview” Society of Engineering Science, 33 rd Annual Technical Meeting October 1996
- Davidon, W.C. “Variable Metric Method of Minimization” Argonne National Laboratory Report No. ANL-5990 1959
- Hodge, C.H. “Confinement of Vibration by Structural Irregularities,” Journal of sound and Vibration 28 3 411 424 1982
- Levine-West, M.B. Salama, M.A. “Mode Localization Experiments on a Ribbed Antenna,” AIAA J. 31 10 1993
- Tarnowski, D. J. Allaei, D. Landin, D. Chen, C. Liu, S. “An innovative noise and vibration suppression technique based on the combination of vibration control by confinement and layered damping approaches,” 3 rd Joint Meeting of the Acoustical Societies of America and Japan Hawaii 1996
- Yigit, A. Choura, S. “Vibration Confinement in Flexible Structures via Alternation of Mode Shapes by Using Feedback,” J. of S. & Vib. 179 4 1995
- Shelley, F.J. Clark, W.W. “Active Mode Localization in Distributed Parameter Systems with Consideration of Limited Actuator Placement,” 15th ASME Biennial Conf. On Vibration & Noise 1995
- Allaei, D. “Performance Comparison Between Vibration Control by Confinement and Conventional Techniques,” Symposium on Active and Hybrid Structural Control, ASME 16 th Biennial Conf. on Mech. Vib. & Noise 1997
- Allaei, D. Shih, Y. T. Tarnowski, D.J. “A comparison between Passive Vibration Control by Confinement and Current Passive Techniques,” SAE paper 97NV61 1997
- Clark, W.W. Sun, F. Tarnowski, D.J. “On the Use of Vibration Confinement to Enhance Conventional Vibration Control,” J. of Vib. and Control 1997