This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mechanisms of Liquid Film Migration (LFM) in Aluminum Brazing Sheet
Annotation ability available
Sector:
Language:
English
Abstract
The phenomenon of liquid film migration (LFM) in aluminum brazing is described in a companion paper [1]. To clarify the mechanism, the effect of core alloy homogenization, cold work prior to brazing, and brazing temperature on the LFM kinetics has been studied. Based on microstructures, LFM kinetics, and concentration profile data, factors influencing the migration rate of liquid films have been analyzed. Several possible driving forces for LFM are proposed: (1) coherency strain energy, (2) reduction of particle/matrix interfacial energy, and (3) reduction of energy in recovered dislocation structure or subgrain boundaries in the case of lightly cold worked brazing sheet.
Recommended Content
Technical Paper | Liquid Film Migration During Aluminum Brazing |
Technical Paper | Assessment of Lubricants for Aluminum Forming |
Technical Paper | Development of Corrosion Resistant Brazing Sheet for Drawn Cup Type Evaporators Part I: Alloy Development |
Authors
Citation
Yang, H. and Woods, R., "Mechanisms of Liquid Film Migration (LFM) in Aluminum Brazing Sheet," SAE Technical Paper 971849, 1997, https://doi.org/10.4271/971849.Also In
References
- Woods R. A. “Liquid Film Migration during Aluminum Brazing”
- Suzuki H. Itoh G. Koyama K. “Effect of Brazing Sheet Core Material Structure on Core Dissolution during Brazing” 34 1984 708 716
- Yamaguchi S. Kato K. “Influence of Precipitate Dispersion on the Erosion of Lightly Deformed Brazing Sheets” 41 1991 238 244
- Balluffi R. W. Cahn J. W. “Mechanism for Diffusion lnduced Grain Boundary Migration” Acta Metall. 29 1981 493 500
- Hillert M. “On the Driving force for Diffusion lnduced Grain Boundary Migration” Scripta Metall. 17 1983 237 240
- Rhee W. Song Y. Yoon D. N. “A Critical Test for the Coherency Strain Effect on Liquid Film and Grain Boundary Migration in Mo-Ni-(Co-Sn) Alloy” Acta Metall. 35 1987 57 60
- Rhee W. Yoon D. N. “The Grain Boundary Migration lnduced by Diffusional Coherency Strain in Mo-Ni Alloy” Acta Metall. 37 1989 221 228
- Yoon D. N. “Theories and Observations of Chemically lnduced Interface Migration” Int. Mater. Rev. 40 1995 149 179
- King A. H. Int. Mater. Rev. 32 1987 173 189
- Handwerker C. A. “Diffusion Phenomena in Thin Film and Microelectronic Materials” Gupta D. Ho P. H. Park Ridge, NJ 1989 245 322
- Kuo M. Fournelle R. A. “Diffusion lnduced Grain Boundary Migration (DIGM) and Liquid Film Migration (LFM) in An Al-2.07%Cu Alloy” Acta Metall. Mater. 39 1991 2835 2845
- Nylen M. Gustavsson U. Hutchinson B. Ortnas A. “Mechanistic Studies of Brazing in Clad Aluminum Alloys” Materials Science Forum 217-222 1996 1703 1708
- Schmatz D. J. “Grain Boundary Penetration during Brazing of Aluminum” Welding Journal Research Supplement October 1983 267S 271S
- Eichhorn E. G. KACC 1993
- Eichhorn E. G. KACC 1995
- Shaarbaf M. KACC 1995
- “Equilibrium Diagrams of Aluminum Alloy Systems” The Aluminum development Association, Information Bulletin No. 25
- “Aluminum - Properties and Physical Metallurgy” Hatch J. E. ASM 1984
- Fujikawa S. I. Hirano K. I. Fukushima I. “Diffusion of Silicon in Aluminum” Metall. Trans. December 1978 1181 1815