This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Pulsating Blankholder Force
Annotation ability available
Sector:
Language:
English
Abstract
In sheet metal stamping some industrial applications have shown that it is possible to achieve larger drawn depth by using a pulsating blankholder force.
In deep drawing, areas with and without tangential stresses have to be distinguished. Areas without tangential stresses can be described by the strip drawing test. Areas with tangential stresses are described by using a deep drawing die for the production of cups which are axisymmetric.
With the strip drawing test it could be shown that it is possible to reduce the increase of the friction force, caused by adhesion. Another effect is the reduction of the peak of the transition of static to dynamic friction.
It was shown by experimental research, that the wrinkle height of parts, produced with pulsating blankholder force is in the range of the wrinkle height of parts produced with a constant blankholder force which is equal to the maximum force of the pulsation. A reduction of the friction force was found, and the drawing depth was increased.
Recommended Content
Citation
Siegert, K. and Ziegler, M., "Pulsating Blankholder Force," SAE Technical Paper 970987, 1997, https://doi.org/10.4271/970987.Also In
References
- Siegert, K. CNC-Hydraulic Multipoint Blankholder Systems for Sheet Metal Forming Presses Annals of the CIRP 42 1 1993 319 322
- Straube, O. 1994 München, Wien
- Klamser, M. Siegert, K. Oberursel 1992
- Kergan, R. Computerised control of the blankholder force in deep drawing IDDRG 95 Colmar
- Siegert K Ziegler, M. Closed Loop Binder Force System SAE International Congress and Exp. Detroit, Michigan, USA Feb 26-29 1996
- Siegert K. Ziegler M. 1996
- Siegert K. Ziegler, M. 1996
- Möellers J. Fischer F. 11 1975 457 460
- Raible W. 1958
- Salesskij W. 1965 9 98 102
- Karnov M. Y. Mechanical working by the vibration method Metal Treatment and drop forging 28 1961 192 158 162
- Hansen N. Stolberg 1968
- Schedin, Erik Mechanisms Influencing the Stability of the Friction Conditions During Press Forming Operations
- Siebel, E. 1953
- Lehfeldt, E. 1968
- Banabic, D. Research Concerning Formability of Metal Sheet Using Forming Limit Diagrams Technical University of Cluj- Napoca 1993
- Breun, F. 1982
- Da Re', Mario Process and hydraulic press for the pressing of sheets
- Siegert, K Simon, J. Comparison of Forming Behavior anf Formability of Coated Steel Sheets IDDRG Working Group Meeting Lisbon 1994
- Shedin, E. Mechanisms Influencing the Stability of the Friction Conditions During Forming Operations IDDRG Working Group Meeting Lisbon 1994