This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study of Diesel Spray Combustion in An Ambient Gas Containing Hydrocarbon Using a Rapid Compression Machine
Annotation ability available
Sector:
Language:
English
Abstract
The effect of ambient gas hydrocarbon content on diesel spray ignition and combustion was examined in this research project. A single-stroke rapid compression machine was used to prepare the ambient gas pressure and temperature before the diesel fuel injection process. Variations of ambient gas composition were achieved by adding different quantities of methane and propane to the intake air, the content ranged from 0.0 to 0.6 equivalence ratio. The two-color method was applied to analyze the flame temperature and KL factor was determined from the colored flame image taken by a high-speed camera. Also, compression ignition characteristics of lean methane-air and propane-air mixtures were examined.
Recommended Content
Authors
Citation
lida, N., Nakamura, M., and Ohashi, H., "Study of Diesel Spray Combustion in An Ambient Gas Containing Hydrocarbon Using a Rapid Compression Machine," SAE Technical Paper 970899, 1997, https://doi.org/10.4271/970899.Also In
Diesel Engine Combustion Processes and Emission Control Technologies
Number: SP-1246; Published: 1997-02-24
Number: SP-1246; Published: 1997-02-24
References
- Schweizer P.H. Grunder L.J. “Hybrid Engines” SAE Trans. 7 1963
- Yonetani, H. Nakamura, T. Fukutani, I. Watanabe, E. “Hybrid Combustion-Premixed Gasoline Homogeneous Charge Ignited by Injected Diesel Fuel-Two-Stroke Cycle Engines” SAE Trans. 98 694 1989
- Yonetani, H. Okanishi, N. Fukutani, I. Watanabe, E. “Hybrid Combustion-Premixed Gasoline Homogeneous Charge Ignited by Injected Diesel Fuel-4-Stroke Cycle Engines” SAE Paper 890428 1989
- Ikegami, M. Shioji, M. ZHU Qi-Ming Sato, K. Takayanagi, F. “Lean-Burning Characteristics of a Gas-Fueled Spark-Ignition Engine” Proceeding of The Japan Society of Mechanical Engineering 59-562 2094 1993
- Murase, E. Ono, S. Hanada, K. Tara, F. Oppenheim Antoni K. “Combustion of Turbulent Lean Mixtures by Pulsed Jet Ignition” Proceeding of The Japan Society of Mechanical Engineers 58-556 3795 1992
- Goto, Y. “Study of Flame Speed and Wall Temperature Visualization on Spark-Ignition Engine Ultralean Combustion” Proceeding of The Japan Society of Mechanical Engineers 57-539 2404 1991
- Wada, Y. Tsukatani, E. Kamihara, T. Kono, M. “Studies on Ignition and Combustion by the Extremely Stratified Charge Combustion Method” Proceeding of The 8th Internal Combustion Joint Symposium 203 1990
- Furuno, S. Iguchi, S. Inoue, T. “Lean Combustion Characteristics of Local Stratified Charge Mixture” Proceeding of Automobile Technology Society Lecture Articles 942 1994
- Hattori, H. Ota, M. Sato, E. Kadota, T. “Fundamental Study on DISC Engine with Two-Stage Fuel Injection” Proceeding of The Japane Society of Mechanical Engineers 59-557 304 1993
- Yonetani, H. Hara, K. Fukutani, I. “Hybrid Combustion-Premixed Gasoline Homogeneous Charge Ignited by Injected-Exhaust Emission Characteristics” SAE Paper 940268 1994
- Takahashi, K. Daisho, Y. Kihara, R. Saito, T. “Combustion and Exhaust Emission Control in a Dual-Fueled Engine -Utilizing Natural Gas with Diesel Ignition Assistance and EGR-” Proceeding of The 12th Internal Combustion Joint Symposium 425 1995
- Kamimoto, T. “New Approaches to Clean Diesel Engines” Proceeding of The 73th Japan Society of Mechanical Engineers Spring Meeting 96-1 591 1996
- Iida, N. Nishimura, H. Kotsuji, T. Yoshida, T. Hosonuma, S. “Combustion Process in High-Pressure Diesel Spray with Micro hole Nozzle Using a Rapid Compression Machine” Proceeding of The Japan Society of Mechanical Engineers 62-598 2513 1996
- Yokota, H. Kamimoto, T. Kosaka, H. Tsujirnura, K. “Fast Burning and Reduced Soot Formation via Ultra-High Pressure Diesel Fuel Injection” SAE Paper 910225 1991
- Kobayashi, S. Sakai, T. Nakahira, T. Komori, M. Tsujimura, K. “Measurement of flame temperature distribution in D. I. diesel engine with high pressure fuel injection” SAE Paper 920692 1992
- Nakakita, K. Kondoh, T. Watanabe, S. “A Study on Diesel Combustion with High-Pressure Fuel Injection (Improvement of Combustion and Exhaust Emissions Using Small-Hole Diameter Nozzles)” Proceeding of The Japan Society of Mechanical Engineers 60-577 3198 1993
- Takeda, Y. Nakagome, K. Niimura, K. “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection” SAE Paper 961163 1996
- Iida, N. “Surrounding Gas Effects on Soot Formation and Extinction -Observation of Diesel Spray Combustion Using a Rapid Compression Machine-” SAE Paper 930603 1993