This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Material Properties of Fe-Cr-Al Alloy Foil for Metal Support
Annotation ability available
Sector:
Language:
English
Abstract
Recently, a metal support catalyst has been successfully developed and its use has been gradually increasing because of its advantages over the conventional ceramic support. The material properties required of an automotive catalytic converter are expected to increase in severity with intensifying environmental regulations on a worldwide level.
This study examined the material properties required of an Fe-Cr-Al alloy foil for a metal support having increased heat resistance. First, the effect of rare earth metals against high temperature oxidation resistance of the Fe-Cr-Al alloy foil is examined and the developed alloy is proposed. Second, the durability of the metal support is discussed. Third, the accelerated creep elongation caused by the growth of an oxide film when catalyst related material is loaded, is described and the influence on the performance of the metal support is discussed. Lastly, the material properties in order to improve the heat resistance of a metal support are discussed. As a result, it was found that the improvement of proof strength at high temperature is effective for improving the durability of a metal support concurrent with higher oxidation resistance.
Authors
Citation
Fukaya, M., "Material Properties of Fe-Cr-Al Alloy Foil for Metal Support," SAE Technical Paper 970790, 1997, https://doi.org/10.4271/970790.Also In
References
- Takada T. Tanaka T. SAE Paper 910615 1991
- Ohmura K. Fukaya M. Yamanaka M. Abo H. Fudanoki F. Proceedings of International Conference on Stainless Steels 1991 ISIJ 1212
- Yamanaka M. New Materials 10 1994 56 Material Science 31 1994 187
- Ito I. Ohmura K. Fukaya M. et al. Nippon Steel Technical Report, No.64 1995 69
- Yamanaka M. Fukaya M. Fujita N. Heat Treatment 34 1994 137
- Fukaya M. et al. Annual Report of JIM “Materia Japan” 34 1995 626
- Fukaya M. New Materials 4 1996 45
- Hisatomi R. et al. CAMP-ISIJ 4 1993 1122 1123 1124
- Tsujino R. et al. Nippon Steel Technical Report, No.61 1994 38
- Okazaki Y. Noda T. Fukaya M. et al. 1996 Nippon Steel Technical Report, No.70 1996
- Fukaya M. Yamanaka M. Aoyagi H. SAE Paper 950622 1995
- Ohmura K. Yamanaka M. Fukaya M. Abo H. Funaki S. Proceedings of the First International Conference on Heat-Resistant Materials 1991 ASM Int. 505
- Hancoch P. Fletcher R. Metallurgia 6 1996 1
- Caplan D. Hussey R.J. Sproule G.I. Graham M.J. Oxid.Met. 14 1980 269
- Fukaya M. Yamanaka M. Ohmura K. CAMP-ISIJ 4 1994 1784
- Fukaya M. Proceedings of JIM-Symposium on High Temperature Oxidation and Strength of Honeycomb Materials for Metal Catalytic Carrier 1996 l3
- Fukaya M. Yamanaka M.
- Fukaya M. et al. Jun 20 1995
- Fukaya M. Yamanaka M. Ohmura K. CAMP-ISIJ 9 1996 425
- Fukaya M. Yamanaka M.