This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formability Performance of Prephosphated Galvannealed Sheet Steel
Annotation ability available
Sector:
Language:
English
Abstract
An experiment to determine the effects of mill oil weight, phosphate coating type and weight, surface roughness, and blank wash on the formability of prephosphated galvannealed steel was conducted. Limiting dome height, limiting drawing ratio and draw bead simulator friction tests were run on bare galvannealed and galvannealed coated with a conventional process phosphate and with three Dried-in-Place (DIP) phosphate products. Formability performance of both the conventional and DIP phosphate coated products was significantly better than that of oil-only coated galvannealed steel. Phosphate coating weights heavier than about 0.6 g/m2 per side did not significantly improve formability. The formability improvement from phosphate coating was about equal for the four products tested, with optimum oil weight for formability in the 1.3 to 1.9 g/m2 range. Surface roughness (within the testing range) and blank washing had no significant effects on formability.
Recommended Content
Technical Paper | Operant Friction Coefficient of Prephosphated Galvanneal under Punch Stretching |
Technical Paper | Galvanneal Powdering in Drawbeads |
Citation
Lautensleger, R. and Davidson, D., "Formability Performance of Prephosphated Galvannealed Sheet Steel," SAE Technical Paper 970717, 1997, https://doi.org/10.4271/970717.Also In
References
- Gessner G. Huttenbraucker K. F. zu Bexten J. H. Meyer Mohr K. P. Proceedings 2nd International Conference on Zinc Coated Steel Sheet 1988
- Wolfhard D. Meuthan B. Steffen R. Proceedings DFO/DGO-Conference Versiegelung und laclierung von galvanisch verzinkten Oberflachen 107 1989
- Riesop J. Roland W. A. “Prephosphating of Hot-Dip Galvanized Steel Sheet” Proceedings, 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Galvatech '92 236 240
- Chou K. C. “Performance of Prephosphated Galvanneal Sheet Steel” Galvatech '95 Conference Proceedings Iron & Steel Society September 1995 269 276
- Kunde N. P. Michal G. M. Payer J. H. “Performance Evaluation of Prephosphated Galvannealed Steel Sheet” Galvatech '95 Conference Proceedings Iron & Steel Society September 1995 635 643