This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Tooling Geometry on the Quality of Aluminum Sheet Shearing Surface
Annotation ability available
Sector:
Language:
English
Abstract
The present research is concerned with the quality of the shearing process, which is an integral part of automotive vehicle body stamping. Experiments were done to analyse the influence of the gap between the cutting edges and the geometry of the cutting blades, on the quality of the sheared surface. Experimental results are presented as microstructures of polished samples. To predict the quality of sheared surfaces, a numerical code based on solid mechanics equations, elastoplastic flow theory and cummulative theory of damages was created.
Recommended Content
Authors
Citation
Golovashchencko, S., Davies, R., and Stewart, W., "Influence of Tooling Geometry on the Quality of Aluminum Sheet Shearing Surface," SAE Technical Paper 970716, 1997, https://doi.org/10.4271/970716.Also In
References
- Izod E.G. “Behaviour of materials of construction under pure shear” Proc.Inst.Mech.Engrs 5 55 1906
- Anthony G.C. “Pressure-recording indicator for punching machinery,” Trans. ASME 33 369 380 1911
- Popov E.A. Fundamentals of sheet metal stamping theory Engineering Moscow 1977
- Bhattacharyya D. Collins I.F. Sharp R.M. “Shearing of Anisotropic Metal Sheets - Macroscopic and Microscopic Analyses,” Int. J. Mech. Sci. 30 683 690 1988
- Atkins A.G. “On Cropping and Related Processes,” Int. J. Mech. Sci. 22 215 231 1980
- Jouri W.S. Jones N. “The Impact Behaviour of Aluminium Alloy and Mild Steel Double-Shear Specimens,” Int.J.Mech.Sci. 30 153 172 1988
- Atkins A.G. Mai Y.W. “On the Guillotining of Materials,” J. of Material Science 14 2747 2754 1979
- Dasgupta D.K. “Force and Energy Calculations in Metal Shearing Using Inclined Knife Profiles,” J.Mater.Shaping Technology 6 165 169 1989
- Johnson W. Sowerby R. Haddow J.B. Plane-strain Slip-Line Fields: Theory and Bibliography American Elsevier Publishing Company, Inc. New York 1970
- Kasuga Y. Tsutsumi S. Mori T. “On the Shearing Process of Ductile Sheet Metals (2nd Report: Theoretical Analysis of the “Scissors Type” Shear),” Bulletin of the JSME 20 1336 1343 1977
- Lisin A.G. “The Influence of Cross-Piece Width on the Blanking-Piercing Load” Separating Processes in Metal Forming 58 61 Kishinev 1975
- Lisin A.G. “Slip-Lines Method Prediction of Stresses on the Shearing edge of the Die,” Forging and Stamping Manufacturing 3 20 22 1964
- El-Wakil S.D. “Deformation in Bar Cropping Investigated by Visioplasticity,” J. of Mechanical Working Technology 1 85 98 1977
- Masuda M. Jimma T. Yamauchi S. “Research on the Shaving Mechanism of Sheet Metals with Punch and Die,” Bulletin of JSME 9 224 232 1966
- Dasgupta D.K. “Deformation and Interface Contact Friction in Metal Shearing Using Inclined Knife Profiles,” J.Mater.Shaping Technology 5 133 142 1987
- Timoshchenko V.A. Slip-Lines Method Theoretical Analysis and Development of Shearing Processes of Metal Stamping Kishinev Politechnical Institute 1987
- Jimma T. “The Theoretical Research on the Blanking of a Sheet Material,” Bulletin of JSME 6 568 576 1963
- Ghosh A. Raghu Ram V. Popat P.B. “A New Approach to the Mechanics of Blanking Operation: Theoretical Model and Experimental Verification,” Journal of Mechanical Working Technology 11 215 228 1985
- Solovcov S.S. Shearing of Bars in Dies Engineering Moscow 1985
- Maiti S.K. “An Investigation into the Effects of Axial Forces on Bar Cropping Based on a Study of Pre-Cracking Elastic Stress Distribution,” J. of Mechanical Working Technology 3 193 200 1979
- Wong V.G. Das M.K. “Analysis of Bar Cropping” Proc. of the 15th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Macmillan 617 624 1974
- Ahmed M.H.M. Das M.K. “A Study of Stresses in the Double Cropping Process,” Proc.of the 18th Int. Machine Tool Design and Research Conf. Alexander J.M. Macmillan 183 191 1977
- Nakagava T. Miymoto K. “Tool-Life Test in Clamp Shearing of Steel Bar and Wire,” Proc. of the 12th Int. Machine Tool Design and Research Conf. Koenigsberger F. Tobias S.A. Macmillan 567 572 1971
- Lattey J.I. Sessions T.M.B. Harris L.N. Foster N. “Precision Metal Cropping Under High Axial Load,” Proc. of the 11th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Pergamon Press 567 572 1970
- Das M.K. Sadollah Z.T. “Cropping Billets wit Low Aspects Ratios,” Proc. of the 20th Int. Machin Tool Design and Research Conf. Tobias S.A. Macmillan 195 202 1979
- Bridgeman P.W. Studies in Large Plastic Flow and Fructure McGraw-Hill New York 1952
- Kolmogorov V.L. Stresses, Strains, Fracture, Metallurgy Moscow 1970
- Smirnov V.S. Grigoriev A.K. Pakudin V.P. Sadovnikov B.V. Deformation resistance and ductility of metals Metallurgy Moscow 1975
- Skudnov V.A. Limit Plastic Deformations of Metals Metallurgy Moscow 1989
- Yajima M. Ishii M. Kobayashi M. “The Effects of Hydrostatic Pressure on the Ductility of Metals and Alloys,” International Journal of Fracture Mechanics 6 139 150 1970
- Zok F. Embury J.D. “Forming of Low-Ductility Materials Under Hydrostatic Pressure,” Journal of Material Shaping Technology 8 77 81 1990
- Johnston R. Fogg B. Chisholm A.W.J. “An Investigation into the Fine Blanking Process,” Proc. of the 9th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Pergamon Press 397 410 1968
- Johnston R. Swift K. “Smooth Hole Wall Piercing in the Manufacture of Precision Mechanisms,” Proc. of the 15th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Macmillan 729 734 1974
- Strasser F. Metal Stamping Plant Productivity Handbook Industrial Industrial Press Inc. New York
- Johnson W. Slater R.A.C. “A Survey of the Slow and Fast Blanking of Metals at Ambient and High Temperatures,” Proc. CIRP-ASTME 825 851 1967
- Johnson W. Slater R.A.C. “Further Experiments in Quasi-Static and Dynamic Blanking of Circular Discs from Various Materials,” Applied Mechanics Convention, Proc. Institution of Mechanical Engineers 180 163 181 1966
- Davies R.G. Dhawan S.M. “Further Developments in High-Speed Blanking of Metals,” Proc. of the 7th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Pergamon Press 67 79 1966
- Borrini B. Fedrigo R. Piglione L. “Electrodynamic Press: A Machine for the High-Velocity Blanking on Industrial Scale,” Proc. of the 11th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Pergamon Press 671 690 1970
- Nakagawa T. Shimori K. “Production of Crankshafts by Clamp Shearing,” Proc.of the 15th Int. Machine Tool Design and Research Conf. Tobias S.A. Koenigsberger F. Macmillan 611 616 1974
- Golovashchenko S.F. “Electromagnetic Impulse Joining and Shearing of Al-Cu and Al-Mg Alloy Tubes,” Proceedings of 1995 Fall TMS Meeting Cleveland
- Ovchinnikov A.G. Golovashchenko S.F. “Numerical Simulation of Impulsive Metal Forming,” Proceedings of the International Conference on Numerical Simulation in Industry Baden-Baden, Germany 1994 149 168
- Kurosaki Y. Fujishiro I. Bann K. Okamoto A. “A Manufacturing Process Using Impact Compression of a Viscoplastic Pressure Medium (Application to the Piercing of Fine Holes),” JSME International Journal 30 653 660
- Golovashchenko S.F. “Numerical Simulation of High-Rate Forming Technological Processes,” Vestnik of Moscow State Technical University 1994 4 40 52
- Smith D.A. Die Design Handbook Society of Meanufacturing Engineers Dearborn 1990