This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Measurement of Rubber Elasticity and Correlation with Seal Life
Annotation ability available
Sector:
Language:
English
Abstract
Two new methods will be presented to measure rubber and seal elasticity - Recovery from Bending (RFB) and Loss of Seal Interference (LOSI). It will be demonstrated, the kinetics of rubber elasticity change during immersion in oil with aeration and oil change for different rubber compounds as NBR, HNBR, ACM, AEM, FKM and VMQ. Using the kinetics of Recovery From Bending, the estimation of seal life can be done.
Recommended Content
Authors
Topic
Citation
Dinzburg, B., "Measurement of Rubber Elasticity and Correlation with Seal Life," SAE Technical Paper 970547, 1997, https://doi.org/10.4271/970547.Also In
References
- Akaoka J. “Effect of Wobbling or Jerking of Shaft on the Sealing Performance of an Oil Seal” Lubrication 2 6 273 1957 Japan
- Akaoka J. Nitani A. “On the Following Property of the Oil Seal Lips (First Report)” Lubrication 22 46 1977
- Akaoka J. Nitani A. “The Following Property of the Oil Seal Lips (Second Report)” Lubrication 27 6 1982
- Prati E. “Dynamic Behavior of Radial Lip Seal Under Effect of Shaft Eccentricity” 10 th International Conference on Fluid Sealing Innsbruck, Austria 1984
- Prati E. “A Theoretical-Experimental Method for Analyzing the Dynamic Behavior of Elastomeric Lip Seals” 129 th Meeting Rubber Division A.C.S. New York 1986 Rubber Chemistry and Technology 60 176 189 1987
- Horve L. “Radial Lip Seal Dynamic Behavior” University of Bologna Internal Chicago Rawhide Report 1986
- Horve L. “Radial Lip Seal Dynamic Behavior” University of Bologna Internal Chicago Rawhide Report 1986
- Mims S. “Dynamic Behavior of Radial Lip Seals (A Followability Study)” Thesis of M.D. Armour College, Illinois Institute of Technology 1988
- Stakenborg M.L. “On the Sealing and Lubrication Mechanism of Radial Lip Seals” Ph.D. Thesis Eindhoven University of Technology 1988
- Malanichev V.I. Chercky I.N. 24 26 1984
- Dinzburg B.N. Keller R.W. Bond R. “Heat Resistance Evaluation of Rubber Compounds” Rubber World 1975 28 37 1988 41 8 398 404 1988
- Dinzburg B.N. 1993
- Dinzburg B.N. Bond R. “Stiffness Measurement for Evaluating Heat Resistance of Rubber Compounds” Rubber World 201 4 20 24 1990
- Björk F. Dickman D. Stenberg B. “Long Term Studies of Rubber Materials by Dynamic Mechanical Stress Relaxation” Rubber Chemistry and Technology 62 3 387 425 1989
- Isayev A.I. Cao D. Dinzburg B.N. “Elastic Recovery of Rubber Vulcanizates at Very Short Times” Paper #47 Rubber Division ACS Cleveland, OH October 1995
- Dinzburg B.N. “Investigation of the Effect of Aeration on Automotive Oils and Rubber Compounds” 142 nd ACS Meeting November 1992 Paper #89
- Dinzburg B.N. “Influence of Oil Aeration on Dynamic Shaft Seals Under Laboratory and Field Conditions” SAE Paper 930535 1993
- Dinzburg B.N. “Influence of Oil Additives on FKM and HNBR Compounds” Lubrication Engineering 1995
- Shimoi Y. “One Experiment Concerning the Sealing Mechanism of an Oil Seal” Nihon Dust Keeper 1 5 Tokyo 1962 Japan
- Jagger E.T. “Study of the Lubrication of Synthetic Rubber Rotary Shaft Seals” Proc. Conf. Lubric. Wear 409 1957
- Müller H.K. “Concepts of Seal Mechanism of Rubber Lip Type Rotary Shaft Seals” Proc 11 th Conference on Fluid Sealing BHRA 1987
- Horve L. “A Macroscopic View of the Sealing Phenomenon for Radial Lip Oil Seals” Proc. 11 th Conference on Fluid Sealing BHRA 1987
- Johnston D.E. “Theoretical Analysis of a Pumping Mechanism Occurring between Relatively Moving Surfaces” 12 th International Conference on Fluid Sealing 1989
- Horve L. “The Correlation of Rotary Shaft Radial Lip Seal Service Reliability and Pumping Ability to Wear Track Roughness and Microasperity Formation” SAE Paper 910530 1991
- Dinzburg, B. “Rubber Elasticity - the Main Characteristic for Dynamic Shaft Seals” Paper #71 Rubber Division, American Chemical Society October 1995