This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
FE Analysis of Crankshaft Torsional Vibrations for Selection of Damper Pulley
Annotation ability available
Sector:
Language:
English
Abstract
The problem of torsional vibration of the crankshaft of high speed diesel engine has become critical with increase in exciting forces due to high combustion pressures. This results in high torsional vibration amplitudes and hence high stresses. In such a case use of the damper pulley to control the torsional vibration amplitudes and stresses is one of the desired solution. In this paper torsional vibration analysis is carried out in case of six cylinder diesel engine using standard general purpose finite element package ANSYS and a method is developed to find out torsional vibration stresses leading to the selection of damper.
Recommended Content
Authors
Topic
Citation
Ghorad, S., Joshi, S., and Sajanpawar, P., "FE Analysis of Crankshaft Torsional Vibrations for Selection of Damper Pulley," SAE Technical Paper 962490, 1996, https://doi.org/10.4271/962490.Also In
References
- Okamura H Morita T “A Dynamic Stiffness Matrix Approach to the Analysis of Three-Dimensional Vibration of an Automobile Engine Crankshaft” C 427/30/138 IME London 1992
- Tasaka T et al “Development of Computer Aided Engineering for Crankshaft Damper pulley Design” IPC-5 I Beijing, China 1989
- Ohiai K Nakano M “Relation Between Crankshaft Torsional Vibration and Engine Noise” Paper No. 790365 , SAE 1979
- Lacy D J “Computers in Analysis Techniques for Reciprocating Engine Design” C 14/87 IME London 1987
- Wakabayashi K Honda Y et al “The Effect of Typical Torsional Viscous Friction Damper on the Reduction of Vibration in the Three - Dimensional Space of Diesel Engine Shafting” Paper No. 932009 , SAE 1993
- Kabele D F “A New Approach in the Simulation of Crankshaft Torsional Vibration” C 140/84 IME London 1985
- Ker Wilson W “Practical Solution of Torsional Vibration Problems” I and IV Chapman and Hall Ltd. London
- Simon K Chang Thomas “Crankshaft Torsional and Damping Simulation__An Update and orrelation with Test Results” Paper No. 861226 , SAE 1986
- Freakley P K Payne A R “Theory and Practice of Engineering with Rubber” Applied Science Pub. Ltd. London 1978