This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Comparison of Modified Elevated Temperature HFRR Test Data With Scuffing BOCLE Results
Annotation ability available
Sector:
Language:
English
Abstract
Evolving diesel engine design trends are expected to include fuel systems operating at significantly higher pressures and temperatures than in the past. Accordingly, meaningful laboratory tests are needed to help guide this development. Two candidate test methods were evaluated in this exploratory study. Scuffing Load Ball-on Cylinder Lubricity Evaluator (BOCLE) and Modified High-Frequency Reciprocating Rig (HFRR) test results covering a range of operating temperatures were compared with fuel property data. Correlations of the Modified HFRR test data with BOCLE results were also made.
Recommended Content
Authors
Citation
Blizard, N. and Bennett, P., "A Comparison of Modified Elevated Temperature HFRR Test Data With Scuffing BOCLE Results," SAE Technical Paper 961946, 1996, https://doi.org/10.4271/961946.Also In
References
- Nikanjam, Manuch “Development of the First CARB Certified California Alternative Diesel Fuel” SAE 930728
- Nikanjam, M. Henderson, Paul T. “Lubricity of Low Aromatics Diesel Fuels” SAE 920825
- Nikanjam, Manuch Henderson, Paul T. “Lubricity of Low Sulfur Diesel Fuels” SAE 932740
- Lacey, Paul I. Lestz, Sidney J. “Effect of low lubricity Fuels on Diesl Injection Pumps - Part I: Field Performance” SAE 920823
- Lacey, Paul I. Lestz, Sidney J. “Effect of low lubricity Fuels on Diesel Injection Pumps - Part II: Laboratory Evaluation” SAE 920824
- Lacey, P.I. “Wear with low-lubricity fuels I. Development of a wear mapping technique” Wear 160 1993
- Lacey, P. I. “Wear with low-lubricity fuels II. Correlation between wear maps and pump components” Wear 160 1993
- Wang, J.C. Reynolds, D.J. “The Lubricity Requirement of Low Sulfur Diesel Fuels” SAE 942015
- Tucker, R. F. Stradling, R_J. Wolveride, P. E. Rivers, K. J. Ubben, A. “The Lubricity of Deeply Hydrogenated Diesel Fuels - The Swedish Experience” SAE 942016
- Liberio, Patricia D. Garver, John M. “Lubricity of Military Jet Fuels” Lubrication Engineering 51 6 1995
- Cusano, C.M. Flaherty, R.W. Roush, AX “Survey of Winter'93 Low Sulhr Diesel Fuels in the U.S.” SAE 942015
- Mitchell, K. “The Lubricity of Winter Diesel Fuels” SAE 952370
- Westbrook, Steven R. Lacey, Paul I. McInnis, Leona A. Lestz, Sidnes J. LaPera, M. E. “Surveys of Low Sulfur Diesel Fuels and Aviation Kerosenes from U.S. Miliary Installations” SAE 952369
- Wei, Danping Spikes, H. A. “The Lubricity of Diesel Fuels” Wear 111 1986
- Lacey, Paul I. Westbrook, Steven R. “Diesel Fuel Lubricity” SAE 950248
- Wang, Jerry C. Cusano, Carmen M. “Predicting Lubricity of Low Sulfur Diesel Fuel” SAE 952564
- Jenkins, S. R. Landells, R. G. M. Hadley, J. W. “Diesel Fuel Lubricity Development of a Constant Load Scuffing Test Using the Ball on Cylinder Lubricity Evaluator (BOCLE)” SAE 932691
- Hadley, J. W. Owen, G. C. Mills, B. Evaluation of a High Frequency Reciprocating Wear Test for Measuring Diesel Fuel Lubricity” SAE 932692
- Lacey, P.I. “Development of a Lubricity Test Based on the Transition from Boundary Lubrication to Severe Adhesive Wear in Fuels” Lubrication Engineering 50 10 1994
- Voitik, Robert M. Ren, Ning “Diesel Fuel Lubricity by Standard Four Ball Apparatus Utilizing Ball on Three Disk, BOTD” SAE 950247
- Voitik, R.M. “Diesel Fuel Lubricity BOTD Status - 1995” SAE 952371
- Nikanjam, Manuch Crosby, Teri Henderson, Paul Gray, Chris Meyer, Klaus Davenport, Nick “ISO Diesel Fuel Lubricity Round Robin Program” SAE 952372
- Mikkonen, Seppo Tenhunen, Esko “Deposits in Diesel Fuel-Injection Pumps Caused by Incompatibility of Fuel and Oil Additives” SAE 872119
- Gairing, M. Marriott, J.M. Reders, K.H. Reglitzky, A.A. Wolveridge, P.E. “The Effect of Modem Additive Technology on Diesel Fuel Performance” SAE 950252
- Vincent, M.W. Papachristos, M.J. Williams, D. Burton, J. “Diesel Fuel Detergent Additive Performance and Assessment” SAE 942010
- Nikanj am, Manuch Burk, Eric “Diesel Fuel Lubricity Additive Study” SAE 942014
- Cuenca, Roy. M. “Evolution of Diesel Fuel Injection Equipment - The Last Twenty Years” SAE 933015
- “TableCurve” Jandel Scientific 2591 Kerner Blvd., San Rafael, CA 94901
- Robinson, C. J. “Low Resolution Mass Spectrometric Determination of Aromatics and Saturates in Petroleum Fractions” Anal. Chem. 43 1971
- Selby, T. W. “Oxidation Studies with a Modified Thin Film Oxygen Uptake Test” SAE 872127
- Pending ASTM Method “Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-On-Cylinder Lubricity Evaluator (SLBOCLE)”
- Pending ASTM Method “Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)”
- Wang, J. C. Unpublished Laboratory Reports
- Timko, C. A. Unpublished Test Data
- Diesel Fuel Lubricity Meetings 1993-1995
- Meyer, Klaus Private Communication