This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermal Design of the Near Earth Asteroid Rendezvous Spacecraft
Annotation ability available
Sector:
Language:
English
Abstract
The Near Earth Asteroid Rendezvous (NEAR) mission is the first launch in the Discovery Program, a NASA initiative for small planetary missions. Following the launch aboard a 7925 Delta II, and nearly three years of semi-dormant cruise mode, the NEAR spacecraft will rendezvous with and orbit the near-Earth asteroid 433 Eros. While orbiting 433 Eros, NEAR will conduct the first systematic scientific exploration of an asteroid by measuring its bulk, surface, and internal properties. In order to accomplish this task, the NEAR spacecraft contains a suite of sensors comprised of an Infrared (IR) Spectrometer, a Multispectral Imager/Spectrometer, an X-Ray/Gamma-Ray Spectrometer, a Magnetometer, and a Laser Rangefinder. The structure supporting these sensors is part of a 3-axis stabilized, solar-oriented spacecraft that employs fixed coplanar solar arrays to provide a constant voltage, regulated power bus. The NEAR propulsion system incorporates the unique thermal design of a single 450 Newton (N) bi-propellant thruster embedded in the spacecraft, accompanied by four external 22.5 N and seven external 4.5 N mono-propellant thrusters.
Due to its externally mounted sensors, tight power budget, and widely varying mission conditions, the NEAR spacecraft presented a challenging thermal design opportunity. Further compounding this challenge were the cost and schedule constraints imposed by the Discovery program guidelines. This paper describes the design approach, problems encountered in the design process, and final thermal design. The thermal modeling of the NEAR spacecraft and instruments is discussed, as are the analysis techniques and software used to evaluate the thermal design. Results of spacecraft-level thermal vacuum testing are reported in context with comparisons to expected thermal performance, and discrepancies are highlighted. The post-test thermal model correlation effort required to resolve these discrepancies and produce revised on-orbit predictions is detailed. Early mission temperature telemetry is also included and correspondence with predicted performance is discussed.
Recommended Content
Authors
Topic
Citation
Ercol, C. and Krein, S., "Thermal Design of the Near Earth Asteroid Rendezvous Spacecraft," SAE Technical Paper 961573, 1996, https://doi.org/10.4271/961573.Also In
References
- Santo, A. G. Lee, S. C. Gold, R. E. “NEAR Spacecraft and Instrumentation” The Journal of Astronautical Sciences 43 4 October-December 1995 373 397
- Farquhar, R. W. Dunham, D. W. McAdams, J. V. “NEAR Mission Overview and Trajectory Design” The Journal of Astronautical Sciences 43 4 October-December 1995 353 371
- NEAR Program Technical Plan The Johns Hopkins University Applied Physics Laboratory July 1993
- Glenn, D. E. “Analysis of LVA Plume Impingement on NEAR Solar Panels” 22 April 1994
- Thermal Radiation Analysis System II User's Manual National Aeronautics and Space Administration (NASA) Lyndon B. Johnson Spacecraft Center under contract NAS9-15832 October 1986
- SINDA/FLUINT User's Manual National Aeronautics and Space Administration (NASA) Lyndon B. Johnson Space Center (JSC) 1991
- SINDA/G (Formerly SINDA/1987/ANSI) Version 1.44 User's Manual Network Analysis Associates 1993