This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation and Observation of Transient Effects in Elastohydrodynamic Lubrication
Annotation ability available
Sector:
Language:
English
Abstract
Many engineering components in engines and machines are of a counter conformal geometry (e.g. valve trains, rolling element bearings and gears) and impose not only high shear rates and temperatures but also extremely high pressures on the lubricant. The effect of pressure is to elastically deform the sliding/rolling contact geometry. Of crucial importance to the engineering and lubricant designer is the magnitude of the lubricant film thickness generated under these severe conditions. Steady state isothermal elastohydrodynamic (EHD) lubrication is now relatively well understood by the use of engineering correlations, first propounded by Dowson et. al., for both line and point contacts, which are used as design tools. However, with ever increasing demands to improve the efficiency of machines, these correlations do not satisfy all the design needs, especially under reversal conditions, where wear is a major problem. In this paper, detailed computer simulations of the oil film shape in EHD line and point contacts under transient operation are reported. The line contacts derive from kinematic models of a cam and follower valve train and an involute spur gear system, and the point contact corresponds to a laboratory rheometer. The simulation of transient effects induced by reversal of lubricant entrainment velocity is discussed and compared with experimental results obtained using a thin film optical interferometry technique and high speed video recording. This provides convincing experimental validation of the models. In both the simulated and experimental studies the region of minimum oil film thickness is seen to move rapidly from one side of the Hertzian loaded region to the other during lubricant entrainment velocity reversal, proceeding via an intermediate geometry that entraps high viscosity oil and prevents the film thickness ever falling to zero. The simulation of transient effects induced by shock loading is also discussed. This appears to involve a similar oil entrapment effect with surprising implications for the operation of gears and cam and follower systems and the understanding of boundary friction and wear.
Recommended Content
Authors
Citation
Scales, L., Rycroft, J., Horswill, N., and Williamson, B., "Simulation and Observation of Transient Effects in Elastohydrodynamic Lubrication," SAE Technical Paper 961143, 1996, https://doi.org/10.4271/961143.Also In
References
- Hamrock B.J. Dowson D. “Ball Bearing Lubrication” John Wiley and Sons 1981
- Dowson D. Higginson G.R. “Elastohydrodynamic lubrication” Pergamon Press 1977
- Hamrock B.J. Dowson D. “Isothermal Elastohydrodynamic Lubrication of point Contacts, Part 3 - Fully Flooded results” J. Lube. Tech. 99 4 1997
- Williamson B.P. Perkins H.N. “The Effects of Engine Oil Rheology on the Oil Film Thickness Between a Cam and Rocker Follower” SAE Paper No. 922346
- Johnston G.J. Wayte R. Spikes H.A. “The Measurement and Study of Very Thin Films in Concentrated Contacts” STLE Trans. 187 194 1991
- Schlijper A.G. Scales L.E. Rycroft J.E. Tools and techniques for routine EHL modelling Tribology International
- Nurgat E. Berzins M. Scales L.E. Solving EHL problems using iterative, multigrid and homotopy methods Trans ASME Journal of Tribology
- Colgan T.A. Bell J.C. A Predictive Model for the wear of Automotive Valve Train Systems SAE Paper No. 892145
- Wang K.L. Cheng H.S. “A numerical solution to the dynamic load, film thickness and surface temperature in spur gears, part 2: results” Trans. ASME Journal of Mechanical Design 103 Jan. 1981 188 194
- Mobil Handbook 3rd Mobil Oil Corp. New York 1979
- Roelands C.J.A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils Technische Hogeschool Delft, Netherlands
- Venner C.H. ten Napel W.E. Bosma R. Advanced multilevel solution of the EHL line contact problem Journal of Tribology 112 1990 426 432
- Lubrecht A.A. ten Napel W.E. Bosma R. Multigrid - An alternative method of solution for two-dimensional elastohydrodynamically lubricated point contact calculations ASME Journal of Tribology 109 437 443