This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Thermal Stability of Detergents and Carrier Fluids on the Formation of Combustion Chamber Deposits
Annotation ability available
Sector:
Language:
English
Abstract
The effect of engine operating conditions on the formation of combustion chamber deposits has been studied by varying the driving cycle used in a series of vehicle tests aimed at measuring the CCD formation tendencies of different multifunctional fuel detergent additives. It was found that at higher engine temperatures it is not possible to easily differentiate the performance of different additives and that low load and low speed conditions should be chosen when testing additives for CCD control. The data obtained suggest that there is a direct correlation between the decomposition temperature of additive components as measured by thermogravimetric analysis (TGA) and their CCD formation tendencies. Of the various carrier fluids surveyed, materials based on alkyl oxides seem to perform the best in controlling CCD formation.
Recommended Content
Topic
Citation
Crema, S., Schreyer, P., and Miin, T., "Effect of Thermal Stability of Detergents and Carrier Fluids on the Formation of Combustion Chamber Deposits," SAE Technical Paper 961097, 1996, https://doi.org/10.4271/961097.Also In
References
- Peyla, R. J “Proceedings or the CRC Workshop on combustion chamber deposits, Orlando, Florida, November 15-17, 1993.” CRC, Inc. 219 Perimeter Center Parkway Atlanta, GA 30346, USA 7 109
- Nagao, M. Kaetko, T. Iwamoto, S. Ohmori, H. Matsuno, S. “Mechanism of combustion chamber deposit interference and effects of gasoline additives on CCD formulation” SAE Paper No. 950741 SAE SP-1095 1995
- Jackson, M.M. Pocinki S.B. “Effects of fuel and additives on combustion chamber deposits” SAE Paper No. 941890 SAE SP-1054 1994
- Moore, S.M. “combustion chamber deposit interference Effects in Late Model Vehicles” SAE Paper No. 940385 1994
- Bitting, W.H. Firmstone, G.P. Keller, C.T. “Effects of combustion chamber deposits on tailpipe emissions” SAE Paper No. 940345 1994
- Gagliardi, J.C. “The effects of fuel anti-knock compounds and deposits on exhaust emissions” SAE Paper No. 670128 1968
- Huls, T.A. Nickol, H.A. “Influence of engine variables on exhaust oxides of nitrogen concentrations from a multicylinder engine” SAE Paper No. 670482 1967
- Nakamura, Y. Yonekawa, Y. Okamoto, N. “The Effect of combustion chamber Deposit on octane requirement increase and fuel Economy” 199 211 Chemistry of Engine combustion chamber deposits Ebert, L.B Plenum Press 1985
- Graiff, L.B. “Some new aspects of deposit effects on engine octane requirement increase and fuel economy” SAE Paper No. 790938 1979
- Niles, H.T. McConnell, R.J. Roberts, M.A. Saillant, R. “Establishment of ORI characteristics as a function of selected fuels and engine families” SAE Paper No. 750451 1975
- Saillant, R.B. Pedrys, F.J. Kidder, H.E. “More data on ORI variables” SAE Paper No. 760196 1976
- Newby, W. “Emphasizes the effect of boiling point on deposit formation” SAE Transactions 66 285 194 1958
- Takei, Y. Uehara, T. Hoshi, H. Okada, M. “Effects of gasoline and gasoline detergents on combustion chamber deposit formation” SAE Paper No. 941893 1994
- Adams, K.M. Baker, R.E. “Effects of combustion chamber deposits location and composition” 19 37
- Ebert, L.B. Davis, W.H. Mills, D.R. Dannerlein, D.I. Rose., D.L. Melchior, M.T. “The chemistry of internal combustion engine deposits - Parts I, II and III” Chemistry of Engine combustion chamber deposits Ebert, L.B. Plenum Press 1985
- Hayes, T.K. White, R.A. Peters, J.E. “combustion chamber Temperature and Instantaneous Local Heat Flux Measurements in a spark plug Ignition Engine” SAE Paper No, 940346 561 573 1973
- French, C.C.J. Atkins, K.A. “Thermal Loading of a Petrol Engine” Proc. Instn. Mech. Engrs. 187 49 73 561 573 1973
- Myers, P.S. Uyehara, O.A. DeYoung, R. “fuel composition and vaporization effects on combustion chamber deposits” U.S. Dept. of Energy December 1981
- Cheng, S.S. “The effect of Engine Oils on Intake Valve deposits and combustion chamber deposits” SAE Paper No. 932810 1993