This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Frictional and Forming Behavior of Zinc-Coated Steel Sheets
ISSN: 0148-7191, e-ISSN: 2688-3627
Published February 01, 1996 by SAE International in United States
Annotation ability available
The application of coated steel sheets is gaining importance in the automotive industry. To determine the friction and the forming behavior, tests were carried out to investigate the influence of different lubricants and tool materials. A segmented draw die was developed for measuring friction and punch forces during the deep drawing process using segments made out of different tool materials. The forming behavior was investigated using a draw part of the size of an typical automotive body part. The change of surface topography parameters due to the forming process was determined with a laser topography device.
CitationSiegert, K. and Simon, J., "Frictional and Forming Behavior of Zinc-Coated Steel Sheets," SAE Technical Paper 960818, 1996, https://doi.org/10.4271/960818.
- Siegert, K Simon, J. Comparison of Frictional Behavior and Formability of Coated Steel Sheets IDDRG Working Group Meeting Lisbon 1994
- Gücker, E.G. 1989
- Krüger, B. 1989
- Schedin, E. Mechanisms Influencing the Stability of the Friction Conditions during Press Forming Operations 18th Bienntial Congress of IDDRG Lisbon 1994
- Schey, J.A. The Applicability of Tribotesters to Sheet Metalworking IDDRG Working-Group Meeting Colmar 1995
- Weinmann, K. Bhonsle, S. Gerstenberger, J. On the Determination of the Coefficient of Friction and the Friction Factor by the Strip-Tension Friction Test Annals of the CIRP 39 (1990) 1 263 266
- Duncan, J.L. Shabel, B.S. Gerbase Filho, J. A Tensile Strip Test for Evaluating Friction in Sheet Metal Forming SAE-Paper 780391 1978 9
- Zheng, R. Overby, D. Strip Friction Experimental Study on Galvanized Steel Sheet 15th Biennial Congress of IDDRG Dearborn 1988
- Siegert, K. Wagner, S. Simon, J. Influence of Surface Microstructures and Coatings on Sheet Metal Forming Process IDDRG Working Group Meeting Linz 1993
- Klamser, M 1994