This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Coating Removal and Surface Preparation with High Pressure Water Jets - A Review of Fundamentals and Applications
Annotation ability available
Sector:
Language:
English
Abstract
High pressure water jets can selectively remove materials, which makes it ideal for coatings removal and surface preparation. A review of some fundamental aspects of this technology will be presented for a better understanding of its potentials, which are evidenced by many published industrial applications. Advantages and limitations of this technology will be summarized.
Recommended Content
Authors
Citation
Zeng, J. and Muñoz, J., "Coating Removal and Surface Preparation with High Pressure Water Jets - A Review of Fundamentals and Applications," SAE Technical Paper 960806, 1996, https://doi.org/10.4271/960806.Also In
References
- Rex, Janet “A Review of Recent Developments in Surface Preparation Methods,” Journal of Protective Coatings & Linings 50 58 October 1990
- Hower, H. E. “Innovations in Surface Preparation: a Review of Equipment,” Journal of Protective Coatings & Linings 38 45 May 1991
- Appleman, B. R. Bruno, J. A. Jr. “Evaluation of Wet Blast Cleaning Units” Journal of Protective Coatings & Lining 34 42 August 1985
- Bauman, F. S. “Advance in High-Pressure Water Surface Preparation Technologies,” proceedings of SSPC National Conference Nashville, Tennessee 1990
- Frenzel, Lydia M. “The Application of Water Blasting and Water Jetting in Surface Preparation of Industrial and Marine Structures,” proceedings of the Eighth American Water Jet Conference Paper 9 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Schmid, Rick “Ultrahigh-Pressure Waterjetting Gains Acceptance as Surface Preparation Method,” proceedings of the Eighth American Water Jet Conference Paper 51 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Shunk, J. F. “Waterjet Cost Effectiveness: Case Studies in Cutting and Coating Removal,” proceedings of the Eighth American Water Jet Conference Paper 52 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Singh, P. J. Munoz J. Chen W. L. “Ultra-High Pressure Waterjet Removal of Thermal Spray Coatings,” proceedings of the 11th International Conference on Jet Cutting Technology BHRA St Andrews, Scotland September 8 - 10 1992
- Vickers, G. W. Johnson W. “The Development of an Impression and the Threshold Velocity for Erosion Damage in α-Brass and Perspex due to Repeated Water Jet Impact,” Int. J. Mech. Sci. 14 765 777 1972
- Huang, Y. C. Hammitt F. G. F. G. Yang W-J “Hydrodynamic Phenomena during High-Speed Collision between Liquid Droplet and Rigid Plane,” ASME Journal of Fluids Engineering 276 294 June 1973
- Engel, Olive G. “Damage Produced by High-Speed Liquid-Drop Impacts,” A. Appl. Phys. 44 2 692 704 February 1973
- Torpey, P. “Some Experiences in the Manufacture and Application of High Pressure Water Cleaning Equipment,” proceedings of the First International Symposium on Jet Cutting Technology Paper D1 BHRA Fluid Engineering Cranfield, Bedford, England April 5-7 1972
- Summers, D. A. “The Effectiveness of Water Jet Sprays in Cleaning and the Mechanisms for Disintegration,” proceedings of the Sixth International Symposium on Jet Cutting Technology Paper C1 BHRA Fluid Engineering Cranfield, Bedford, England April 6-8 1982
- Gronauer, Roy W. “Cleaning & Descaling of Equipment with High Pressure Water,” proceedings of the First International Symposium on Jet Cutting Technology Paper D3 BHRA Fluid Engineering Cranfield, Bedford, England April 5-7 1972
- Hilaris, J. A. Labus T. J. “Marine Application of High Pressure Waterjet,” Erosion: Prevention and Useful Applications. ASTM STP 664 582 596 Adler W. F. American Society for Testing and Materials 1979
- Ganapathi, S. Venkitakrishnan M. K. Ram T. S. “Application of Water Jet Cutting in Solid Propellant Technology,” proceedings of the Sixth International Symposium on Jet Cutting Technology Paper H2 BHRA Fluid Engineering Cranfield, Bedford, England April 6-8 1982
- Sanders, M. J. Bond R. D. “The Use of High Pressure Water Jetting to Remove the Corrosion Deposit from Samples of the WSGHWR Primary Circuit Pipework,” proceedings of the Seventh International Symposium on Jet Cutting Technology Paper C1 BHRA Fluid Engineering Cranfield, Bedord, England June 26-28 1984
- Frondistou-Yannas, S. “Effectiveness of Nonabrasive Cleaning Methods for Steel Surfaces,” National Association of Corrosion Engineers 1986
- Murphy, A. Douglas Carr John H. “High-Pressure Water Jet Coke-Oven Door Cleaning and Mass-Flow Charging of Ovens” Iron and Steel Engineer 23 30 March 1991
- Momber, A. “Aspects of High Speed Water Jet Application to Concrete Sanitation,” proceedings of the First Asian Conference on Recent Advances in Jetting Technology Singapore May 7-8 1991
- Fossey, Robert D. Summers D. A. Blaine J. G. Merk-Gould Linda “A Big Bath for a Big Lady (Cleaning the Statue of Freedom with Waterjets),” proceedings of the Twelveth International Conference on Jet Cutting Technology BHRA Fluid Engineering Cranfield, Bedford, England October 25-27 1994
- Beutin, E. F. Erdmann-Jesnitzer F. Hassan A. M. Louis H. “A New Technique in the Application of High Speed Water Jet.,” proceedings of the Third International Symposium of Jet Cutting Technology Paper F2 BHRA Fluid Engineering Cranfield, Bedford, England May 11-13 1976
- Tönshoff, H. K. Droos F. Hartmann M. “Water Peening - An Advanced Application of Water Jet Technology,” proceedings of the Eighth American Water Jet Conference Paper 33 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Franzel, L. M. “Evaluation of 20,000 psi Water Jetting for Surface Preparation of Steel Prior to Coating,” proceedings of SSPC Annual Symposium Pittsburgh, PA SSPC 1983
- Taylor, Sidney A. Chapman Gerald “Cleaning Pipelines Using High-Pressure Water Jets,” Materials Performance 30 9 25 28 NACE International Houston, TX September 1991
- Taylor, Sidney A. “Automated Surface Preparation Equipment for Short-Segment Pipeline Repair Projects” proceedings of The Sixth European and Middle Eastern Pipeline Rehabilitation and Maintenance Seminar and Exhibition Dubai, United Arab Emirates April 29 May 2 1995
- Harbaugh, Darcy J. Stone M. Anthony “The Effect of High Pressure Water on Material Integrity of Selected Aircraft Coatings and Substrates,” SAE 93-1062 SAE International Warrendale, PA April 5-8 1993
- Parker, Susan “Wet Surface Blasting Methods Improve,” The Motor Ship 78 79 September 1994
- Howlett, J. J. Jr. Dupuy R “Ultrahigh-Pressure Water Jetting for Deposit Removal and Surface Preparation,” Coatings & Linings 38 43 January 1993
- Rainey, Darrell Reece Greg “Thermal Coating Removal System,” proceedings of the Eighth American Water Jet Conference Paper 44 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Meng, P. Geskin E. S. Tismenetskiy L. Leu M. C. “Improvement of the Waterjet Based Precision Cleaning Technology,” proceedings of the Eighth American Water Jet Conference Paper 56 Water Jet Technology Association St. Louis, MO August 26-29 1995
- Sohr, James M. Thorpe Merle L. “Stripping of Thermal Spray Coatings with Ultra High Pressure Water Jet,” proceedings of the 28th Annual Aerospace/Airline Plating & Metal Finishing Forum & Exposition San Diego, CA SAE 920939 SAE International Warrendale, PA April 20-23 1992
- Kratochvil, W. R. Sohr J. M. “Removal of Thermal Spray Coatings with Ultra High Pressure Water jets,” proceedings of the International Thermal Spray Conference & Exposition Orlando, FL May 28 June 5 1992
- Watson, Jeffrey D. Sisson Steve “Removal of Coatings from Jet Engine Components with Ultrahigh-Pressure Waterjets,” proceedings of 29th Annual Aerospace/Airline Plating & Metal Finishing Forum & Exposition Farmington, CT SAE 910933 SAE International Warrendale, PA March 26-28 1991
- Watson, Jeffrey D. “Thermal Spray Removal with Ultrahigh-Velocity Waterjets,” proceedings of The Seventh American Water Jet Conference Seattle, WA August 28-31 1993
- Vaccari, John A. “Waterjet Strips Tenacious Coatings,” American Machinist 46 47 April 1982