This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Characterization of D.I. Diesel Sprays in High Density Conditions
Annotation ability available
Sector:
Language:
English
Abstract
The characteristic parameters and the evolution of continuous Diesel sprays injected against a high density gas have been investigated using high speed photography and phase Doppler anemometry. The injector used for these tests was a two-spring one providing different injection conditions. Three test sections were analyzed at 10, 20 and 30 mm from the injector with several radial measurements for each one. The obtained results provided qualitative and quantitative information about the macroscopic evolution of the spray, but also about the drop velocity distribution and drop size evolution.
Recommended Content
Authors
Topic
Citation
Payri, F., Desantes, J., and Arrégle, J., "Characterization of D.I. Diesel Sprays in High Density Conditions," SAE Technical Paper 960774, 1996, https://doi.org/10.4271/960774.Also In
References
- Reitz, R.D. Bracco, F.V. “Mechanism of atomization of a liquid jet.” Phys. Fluids 25 10 October 1982
- Hiroyasu, H. Arai, M. “Structures of fuel sprays in Diesel engines.” SAE Paper 900475 1990
- Hiroyasu, H. Arai, M. Tabata, M. “Empirical equations for the Sauter mean diameter of a Diesel spray.” SAE Paper 890464 1989
- Dent, J.C. “A basis for the comparison of various experimental methods for studying spray penetration.” SAE Paper 710571 1971
- Reitz, R-D. Bracco, F.V. “On the dependence of spray angle and other spray parameters on nozzle design and operating conditions.” SAE Paper 790494 1979
- Salavert, J.M. Arrègle, J. Reyes, E. “Development of an experimental method for Diesel spray studies in engine equivalent condition.” XI Congreso Nacional de Ingeneria Mecádca 435 442 Valencia 1994
- Sato, G.T. Tanabe, H. Fujimoto, H. “An investigation of Diesel sprays.” 229 235 Madison V.I. 1982
- Hiroyasu, H. Shimizu, M. Arai, M. “The breakup of high speed jet in a high pressure gaseous atmosphere.” 69 74 Madison V.I. 1982
- Coghe, A. Cossali, G.E. “Phase Doppler characterization of a Diesel spray injected into a high density gas under vaporization regimes.” VII Int. Symposium of Application of Laser Technology to Fluid Mechanics Lisbon 1994
- Varde, S.K. Popa, D.M. “Diesel fuel spray penetration at high injection pressures.” SAE Paper 830448 1983
- Rife, J. Heywood, J.B. “Photographic and performance studies of Diesel combustion with a rapid compression machine.” SAE Paper 740948 1974
- Schweitzer, P.H. “Penetration of oil sprays.” Pennsylvania State College Bulletin N° 46 1937
- Kuo, T.W. Bracco, F.V. “On the scaling of transient larninar, turbulent and spray jets.” SAE Paper 820038 1982
- Ranz, W.E. “Some experiments on orifice sprays.” Canad. J. Chem. Engng. 36 175 1958
- Taylor, G.I. “Generation of ripples by wind blowing over a viscous fluid.” Collected works of G.I. Taylor 3 244 1940
- Wu, K.J. et al. “Measurements of the spray angle of atomizing jets.” Journal of Fluids Engineering Transaction of ASME, paper 83-WA/FE-10 1983
- Kuniyoshi, H. et al. “Investigation on the characteristics of Diesel Fuel Spray” SAE Paper 8000968 1980
- Arcoumanis, C. Chang, J.C. Morris, T. “Spray characteristics of single-and-two-spring Diesel fuel injectors,” SAE Paper 930922 1993
- Tsue, M. et al. “Planar fluorescence technique for visualization of a Diesel spray.” SAE Paper 922205 1992
- Jawad, B. Gulari, E. Henein, N.A. “Characteristics of intermittent fuel sprays.” Combustion and Flame 88 394 396 1992
- Chiu, W.S. Shaded, S.M. Lyn, W.T. “A transient spray mixing model for Diesel combustion.” SAE Paper 760128 1976
- Cho, I.Y. et al. “Similarity law of entrainment into Diesel spray and Steady spray.” SAE Paper 900447 1990
- Quoc, H.X Brun, M. “Study on atomization and fuel drop size distribution in direct injection Diesel spray.” SAE Paper 940191 1994
- Tabata, M. et al. “Mean drop diameter of a Diesel spray in a vaporizing process.” JSME International Journal 34 3 369 378 1881
- Bosch, W. “The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection.” SAE Paper 660749 1966
- Payri, F. Desantes, J.M. Arr6gle, J. “Measurement of the injection rate in a IDI Diesel engine.” 174 175 61 67 1993