This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Effects of Electrode Design on Mixture Ignitability
Annotation ability available
Sector:
Language:
English
Abstract
The ignitability of an air/fuel mixture by a spark plug is crucial for spark ignition engine performance, especially at idle and lean fuel conditions. It has been demonstrated that electrode geometry plays an important role in mixture ignitability. Typical industry practice for comparison of a mixture's ignitability by a spark plug is measured by the coefficient of variance (COV) of the indicated mean effective pressure (IMEP). However, the COV of IMEP is influenced by many other factors. Often the COV of IMEP fails to identify the influence of different electrode geometries on mixture ignitability, which hinders the determination of an optimal electrode design.
This paper makes use of the 2% mass burn duration and location (when the spark timing is known) to gage mixture ignitability by a spark plug. Using this parameter, results obtained are consistent with the COV of IMEP. The differences between electrode designs are more clearly shown in the difference of 2% mass burn duration than the difference of COV of IMEP. Based on the 2% mass burned duration and location, the ignitability of a mixture by spark plugs with different electrode geometries are compared. By making use of this parameter, we are able to identify improved electrode geometry for future spark plug design.
Recommended Content
Topic
Citation
Daniels, C. and Scilzo, B., "The Effects of Electrode Design on Mixture Ignitability," SAE Technical Paper 960606, 1996, https://doi.org/10.4271/960606.Also In
References
- Arcoumanis, C. Bae, C. S. “Correlation between Spark Ignition Characteristics and Flame Development in a Constant-Volume Combustion Chamber” SAE 920413 1992
- Heywood, J.B. “Internal Combustion Engine Fundamentals” McGraw-Hill, Inc. 1988
- Hood, S. “The V-grooved Electrode Spark Plug” SAE 901535 1990
- Kalghatgi, G. T. “Spark Ignition, Early Flame Development and Cyclic Variation in IC Engines” SAE 870163 1987
- Nishio, K. Oshima, T. Sher, E. “Cyclic Variability in Spark Ignition Engines A Literature Survey” SAE 940987 1994
- Pischinger, S. Heywood, J. B. “How heat Losses to the Spark Plug Affect Flame Kernel Development in a SI engine” SAE 900021 1990