This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of the Hydrogen-Fueled Rotary Engine for Hybrid Vehicle Applications
Annotation ability available
Sector:
Language:
English
Abstract
The hydrogen-fueled engine has been identified as a viable power unit for ultra-low emission senes-hybrid vehicles The absence of carbon in hydrogen fuel eliminates exhaust emissions of CO, CO2, and hydrocarbons, with the exception of small contributions from the combustion of lubricating oil Thus, the only regulated emission of a hydrogen-fueled engine is NOx, and the engine may be optimized to minimize NOx since the usual constraint of the NOx -hydrocarbon trade-off is not applicable Hydrogen-fueled homogeneous charge piston engines have, however, generally suffered from a variety of combustion difficulties, most notably a proclivity to ignition on hot surfaces such as exhaust valves, spark plug electrodes and deposits on combustion chamber walls The Wankel engine is particularly well suited to the use of hydrogen fuel, since its design minimizes most of the combustion difficulties
In order to evaluate the possibilities offered by the hydrogen fueled rotary engine, dynamometer tests were conducted with a small (2 2kW) Wankel engine fueled with hydrogen Preliminary results show an absence of the combustion difficulties present with hydrogen-fueled homogenous charge piston engines The engine was operated unthrottled and power output was controlled by quality governing, i.e. by varying the fuel-air equivalence ratio on the lean side of stoichiometric The ability to operate with quality governing is made possible by the wide flammability limits of hydrogen-air mixtures NOx emissions are on the order of 5 ppm for power outputs up to 70% of the maximum attainable on hydrogen fuel Thus, by operating with very lean mixtures, which effectively derates the engine, very low NOx emissions can be achieved
Since the rotary engine has a characteristically high power to weight ratio and a small volume per unit power compared to the piston engine, operating a rotary engine on hydrogen and derating the power output could yield an engine with extremely low emissions which still has weight and volume characteristics comparable to a gasoline-fueled piston engine Finally, since engine weight and volume affect vehicle design, and consequently in-use vehicle power requirements, those factors, as well as engine efficiency, must be taken into account in evaluating overall hybnd vehicle efficiency
Recommended Content
Topic
Citation
Salanki, P. and Wallace, J., "Evaluation of the Hydrogen-Fueled Rotary Engine for Hybrid Vehicle Applications," SAE Technical Paper 960232, 1996, https://doi.org/10.4271/960232.Also In
References
- Wallace J S Ward C A “Hydrogen as a Fuel” Int J Hydrogen Energy 8 255 268 1983
- Ballard Power Systems Inc - literature “Zero Emission Fuel Cell Engine” “Powering the Future”
- Nadal M Barbir F “Development of a Hybrid Fuel Cell/Battery Powered Electric Vehicle,” Proc 10th World Hydrogen Energy Conference Cocoa Beach Florida 20-24 June 1994 1427 1440
- Marcenaro B “EQHHPP FC Bus,” Proc 10th World Hydrogen Energy Conference Cocoa Beach Florida 20-24 June 1994 1447 1456
- Geeter E De Van den Broeck H Bout P Woortmann M Grotte Coru J P Peski V A Dufour and B Marcenaro, “Eureka Fuel Cell Bus Demonstration Project,” Proc 10th World Hydrogen Energy Conference Cocoa Beach Florida 20-24 June 1994 1457 1460
- Mazda Canada press release April 1994
- Smith J R “The Hydrogen Hybrid Option,” Proc Workshop on Advanced Components for Electric and Hybrid Electric Vehicles Gaithersburg, MD 1993
- Takano E Takamori Y Morimoto K. Teramoto T “Development of the Direct Injection Hydrogen-Fueled Rotary Engine” Proc 9th World Hydrogen Energy Conference Pans 22-25 June 1992 1121 1130
- Morimoto K Teramoto T Takamori Y “Combustion Charactenstics in Hydrogen Fueled Rotary Engine” SAE Paper 920302 1992
- Swam M R Swam M N Adt R R. “Considerations in the design of an inexpensive hydrogen-fueled engine,” SAE Paper No 881630 1988
- Repair Manual SACHS - Wankelmotor KM 3 October 1975 Fichtel Sachs AG 1975
- Klimstra J “Carburetors for Gaseous Fuels - On Air-to-Fuel Ratio. Homogeneity and Flow Restriction” SAE Paper No 89214 1989
- SAE Recommended Practice - Test Procedure for the Measurement of Exhaust Emissions from Small Utility Engines SAE J1088 June 1983
- Sinclair L A Wallace J S “Lean Limit Emissions of Hydrogen-Fueled Engines” Int J Hydrogen Energy 9 123 128 1984
- Heywood J B Internal Combustion Engine Fundamentals McGraw Hill 1988
- Yamamato K Muroki T “Development on Exhaust Emissions and Fuel Economy of the Rotary Engine at Toyo Kogyo” SAE Paper No 780417 1978
- Smith J R Aceves S Van Blangan P “Senes Hybnd Vehicles and Optimized Hydrogen Engine Design” SAE Paper 951955 1995
- Wallace J S Segal L Keffer J F “Lean Mixture Operation of Hydrogen-Fueled Spark Ignition Engines” SAE Paper 852119 1985
- Swam M R Adt, R R Jr Pappas J M “Experimental Hydrogen-Fueled Automotive Engine Design Data-Base Project” 1&2 DOE Contract No E(04-3)-1212 1983
- Alturdyne Rotary Engine Specifications
- King S R “Durability of Natural Gas Fueled Rotary Engines” SAE Paper No 870448 1987
- Jones C “The Curtes-Wright Rotating Combustion Engines Today” SAE Paper No 886D 1964
- Winterbotham A W Eiermann D Nuber R “Wankel Rotary Gas Engines” Gas Engines and Co-Generation 57 67 IMechE London 1990
- King R O Hayes S V Allan A B Anderson R W P Walker E J “The Hydrogen Engine Combustion Knock and the Related Flame Velocity” Trans Engineering Institute of Canada 2 4 1958
- Mathur H B Khajuria P R “Performance and Emission Characteristics of Hydrogen Fueled Spark Ignition Engine” Int J Hydrogen Energy 9 729 735 1984
- Yamaoka K. Tado H “Improvements of the Rotary Engine with a Charge Cooled Rotor” SAE Paper No 720466 1972
- Bosch Automotive Handbook 2nd 1986 322