This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence of Strain State on Powdering of Galvannealed Sheet Steel
Annotation ability available
Sector:
Language:
English
Abstract
Galvanneal powdering was examined on a stabilized ultra low carbon steel substrate as a function of strain state using cup drawing and in-plane stretching experiments to simulate deformations encountered in production stampings. Significant powdering was encountered in drawing while minimal powdering occurred in in-plane stretching. Powdering was measured at specific locations and correlated with strains in those locations. A powdering map was generated in strain space using the experimental data. A few measurements of powdering on selected regions of an automotive stamped part are reported.
Recommended Content
Authors
Topic
Citation
Rangarajan, V., Jagannathan, V., and Raghavan, K., "Influence of Strain State on Powdering of Galvannealed Sheet Steel," SAE Technical Paper 960026, 1996, https://doi.org/10.4271/960026.Also In
New Steel Products and Processing for Automotive Applications
Number: SP-1172; Published: 1996-02-01
Number: SP-1172; Published: 1996-02-01
References
- Jagannathan, V. “Emerging Technologies in the HotDip Coating of Automotive Sheet Steel” JOM 45 8 48 51 1993
- Gray, B. M. Belleau C. D'Amico M. A. Pyle R. L. Butler J. F. “Development of Hot-Dip Zn-Fe Alloy Coated Steels for Exposed Automotive Applications” 1989 Mechanical Working and Steel Processing Proceedings 3 15 ISS Warrendale, PA 1989
- Kalson, A. M. Jr. “Coated Steel Sheets in North America - An Automotive Perspective” Proceedings of The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech) 271 277 The Iron and Steel Institute of Japan Tokyo, Japan 1989
- Ghuman, A.R.P. Goldstein J. I. “Reaction Mechanisms for the Coatings Formed During the Hot Dipping of Iron in 0 to 10 Pct Al-Zn Baths at 450° to 700° C” Metall. Trans. 2 2903 2914 1971
- Denner, S.G. “An Overview of the Manufacture and Application of Zinc and Zinc Alloy Coated Steel Sheet in North America” Proceedings of The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech) 101 110 The Iron and Steel Institute of Japan Tokyo, Japan 1989
- Jagannathan, V. “The Influence of Coating Characteristics on the Powdering and Corrosion Resistance of Galvanneal Coated Steel Sheet” 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet 127 131 Verlag Stahleisen mbH Dusseldorf, Germany 1992
- Cheng C. Rangarajan V. Franks L. L'Ecuyer J. “The Effect of Steel Substrate on the Microstructure and Powdering of Galvanneal Coatings” 2nd International Conference on Zinc and Zinc Alloy Coated Steel Sheet 122 126 Verlag Stahleisen mbH Dusseldorf, Germany 1992
- Lucas, P. L. Quantin D. Brun C. G. “Effects of Alloying Parameters on Formability of Galvannealed Sheets” Proceedings of The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech) 138 145 The Iron and Steel Institute of Japan Tokyo, Japan 1989
- van Koesveld, W. Lamberigts M. van der Heiden A. Bordignon L. “Coating Microstructure Assessment and Control for Advanced Product Properties of Galvannealed IF Steels” Galvatech '95 Conference Proceedings 343 355 ISS Warrendale, PA 1995
- Leroy, V. “New Trends in the Development of ZnX and Zn+X Coated Steels with Improved Corrosion Resistance: Theory and Practice” Galvatech '95 Conference Proceedings 279 287 ISS Warrendale, PA 1995
- Chou, K-C. Jagannathan V. “Corrosion and Powdering Resistance of Galvanneal For Automotive Applications” Corrosion 91 NACE Houston, TX 1991
- Urai, M. Iwaya J. Arimura M. Sakai H. Miyahara M. “Effects of Forming Conditions on Exfoliation of Galvannealed Steel Sheet” Kobelco Technology Review 11 38 42 1991
- Sudo, C. Nakamori T. Nishihara M. “Behavior of Coating Films in Press Forming of Surface Treatment Steel Sheets” Tetsu to Hagane 66 73 81 1980
- Hashiguchi, K. Yasuda A. Hanazawa T. Ohori M. Ichida T “Galvannealed Sheet Steel with Excellent Press Formability” La Revue de Metallurgie - CIT March 1990 277 282 1990
- Lee, A. P. Masterman N. “The Development of a Hat Channel Test for Evaluating Galvanneal Flaking Performance” SAE paper # 930813 SAE International Warrendale, PA 1993
- Kilpatrick J. R. “A New Etching Technique for Galvanneal and Hot-Dipped Galvanized Coatings” Practical Metallography 28 649 658 1991
- Raghavan, K. S. “A Simple Technique to Generate In-Plane Forming Limit Curves and Selected Applications” Metall. & Matls. Trans. A 26A 2075 2084 1995
- Wang, Y-W Majlessi, S. A. “The Effects of Variable Blank Holder Force on the Strain Path in Deep Drawing Process” Transactions of NAMRI/SME XXII 55 62 1994