This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Tensile Properties on Dent Resistance of Sheet Steels
Annotation ability available
Sector:
Language:
English
Abstract
The dent resistance of AKDQ, bake-hardenable, and IF Re-phosphorized sheet steels in both the as-received and biaxially prestrained conditions were evaluated. A laboratory dent test system for evaluating flat 76.2 mm diameter samples was designed and adapted to a standard universal test frame. Dent testing consisted of measuring the loads and displacements associated with the incremental quasistatic penetration and withdrawal of an indenter into the center of a circular sheet sample mechanically restrained at its perimeter. Dent resistance was characterized by a critical amount of residual displacement. Both experimental measurements and theoretical predictions demonstrate an increase in dent resistance with prestrain up to a maximum followed by a decrease due to thinning. Correlations between dent resistance, tensile properties, and the strain within the dented region indicate that the dent performance depends on the low strain, strain hardening behavior of the material.
Authors
Topic
Citation
DiCostanzo, G., Matlock, D., and Foley, R., "Effect of Tensile Properties on Dent Resistance of Sheet Steels," SAE Technical Paper 960024, 1996, https://doi.org/10.4271/960024.Also In
New Steel Products and Processing for Automotive Applications
Number: SP-1172; Published: 1996-02-01
Number: SP-1172; Published: 1996-02-01
References
- Shi M.F. Wilczynski J.S. “Potential Weight Savings Versus Dent Resistance Performance of High Strength Steel Body Panels,” Proceedings of IBEC: Automotive Body Materials 1993
- Shah V.C. Wenzloff G.J. “A Comparison of Material, Process and Design Optimization Strategies to Achieve Dent Resistant Outer Body Panels,” Proceedings of IBEC, Automotive Body Materials 1994
- Campbell M.P. “Evaluation of a Continuous Annealed Bake Hardenable Steel for Improved Dent Resistance,” SAE Paper No. 890711 SAE Warendale, PA 1989
- Seel T.N. “Bake Hardening Steel Application Study - Key Factors of Dent Resistance Improvement,” SAE Paper No. 910291 SAE Warendale, PA 1991
- Yutori Y. Nomura S. Kokubo I. Ishigaki H.4 “Studies on the Static Dent Resistance,” Proceedings of 11th IDDRG, Les Memoiries Scientifiques Revue Metallurgie, Mars 561 569 1980
- Dicello J.A. George R.A. “Design Criteria for the Dent Resistance of Auto Body Panels,” SAE Paper No. 740081 SAE Warendale, PA 1974
- Burley C.E. Niemeier B.A. Koch G.P. “Dynamic Denting of Autobody Panels,” SAE Paper No. 760165 SAE Warendale, PA 1976
- Johnson T.E. Jr. Schaffit W.O. “Dent Resistance of Cold-Rolled Low-Carbon Steel Sheet,” SAE Paper No. 730528 SAE Warendale, PA 1973
- Painter M.J. Pearce R. “The Denting Behavior of Some Sheet Materials,” Proceedings of 12th IDDRG S Margherita Ligure Italy 399 410 1982
- Shi M.F. Meuleman D.J. Alaniz C.L. Zurdosky S.J. “Prestrain Effects on Static Dent Resistance of Automotive Steels,” SAE Paper No. 910288 SAE Warendale, PA 1991
- Shi Ming F. Meuleman David J. Alaniz Christine L. Zurdosky Stephen J. “An Evaluation of the Dynamic Dent Resistance of Automotive Steels,” SAE Paper No. 910287 1991
- Taylor B. “Formability Testing of Sheet Metals,” Metals Handbook 9th 14 ASM International Materials Park, OH 1988 877 899
- ASTM “E8 - Standard Test Methods of Tension Testing of Metallic Materials,” 1991 Annual Book of ASTM Standards 3.01 ASTM Philadelphia, PA 1991
- Liu Y.C “On the R-Value Measurements,” Metallurgical Transactions A 14A June 1983 1199 1205
- Zandrahimi M. Platias S. Price D. Barrett D. Bate P.S. Roberts W.T. Wilson D.V. “Effects of Changes in Strain Path on Work Hardening,” Metallurgical Transactions A 20 Nov. 1989 2471 2482
- Wagoner R.H. Laukonis J.V. “Plastic Behavior of Aluminum-Killed Steel Following Plane-Strain Deformation,” Metallurgical Transactions A 14 July 1983 1487 1495
- Wilson D.V. Zandrahimi M. Roberts W.T. “Effects of Changes in Strain Path on Work-Hardening in CP Aluminum and an Al-Cu-Mg Alloy,” Acta Metallurgical Materials 38 2 215 226
- Rao B.V.N. Laukonis J.V. “Microstructural Mechanism for the Anomalous Behavior of Aluminum-Killed Steel Prestrained an Plane Stain Tension,” Materials Science and Engineering 60 1983 125 135
- Mirshams A.R. Mohamadian H.P. Crosby K.E. “On the Effects of Predeformation Work Hardening of Ultra Loa Carbon Sheet Steel,” Journal of Material Engineering and Performance 3 1994 65
- Wilson D.V. Ogram G.R. “Directionality of Yield Point in Strain Aged Steels,” Journal of the Iron and Steel Institute,” September 1968 911920
- Dieter G.E. Metallurgy Mechanical 3rd McGraw-Hill, Inc. New York 1986 328
- Abel A. Muir H. “The Bauschinger Effect and Discontinues Yielding,” Philosophical Magazine 26 2 1972 489 504
- Rolfe S.T. Haak R.P. Gross J.H. “Effect of State-of-Stress and Yield Criterion on the Bauschinger Effect,” Journal of Basic Engineering September 1968 403 408
- Williams D.N. “Interaction Between the Bauschinger Effect and Strain Aging,” Metallurgica Transactions 11 September 1980 16291631