This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Corrosion Behavior of a Vehicle Submitted in Service in Subtropical Marine Environment of Okinawa Island for Eight Years
Annotation ability available
Sector:
Language:
English
Abstract
A passenger vehicle in the subtropical marine environment of Okinawa Island for eight years was submitted for corrosion investigation.The precoated sheet steels such as Zn-Ni and Zn-Fe showed excellent corrosion resistance in the door hem flange and a scribed outer panel, compared to cold rolled steel. Cosmetic corrosion of a North America vehicle was more severe than that of a Okinawa vehicle, but a similar corrosion rate for perforation was shown in door hem flange. Basic zinc chloride and β-FeOOH were observed by using micro X-ray diffraction method in the initial stage of corrosion, and then these changed to ZnO and α-FeOOH, Fe304.
Recommended Content
Authors
Citation
Uchida, M., Kurokawa, S., and Mochizuki, K., "Corrosion Behavior of a Vehicle Submitted in Service in Subtropical Marine Environment of Okinawa Island for Eight Years," SAE Technical Paper 960021, 1996, https://doi.org/10.4271/960021.Also In
New Steel Products and Processing for Automotive Applications
Number: SP-1172; Published: 1996-02-01
Number: SP-1172; Published: 1996-02-01
References
- Kurokawa S. Yamato K. Ichida T. “A STUDY ON COSMETIC AND PERFORATION CORROSION TEST PROCEDURES FOR AUTOMOTIVE STEEL SHEETS” paper no.396 The NACE Annual Conference and Corrosion Show Cincinnati, Ohio, USA
- Miki K. Shimogori K. Satoh H. Ikeda K. Nomura S. Terada M. “Corrosion Behavior of Cold Rolled and Zinc Alloy Plated Steel Sheets in Various Kinds of Corrosion Tests” Testu-to-Hagane 72 8 1090 1986
- Wakano S. Shibuya A. Hobo Y. Nishihara M. “Corrosion Performance of Zn Alloy Precoated Steels for Automotive Body” Transactions ISIJ 23 11 1983 967
- Miyoshi Y. “Evaluation Technology of Corrosion Behavior for Automotive Steel Sheet” ISIJ International 31 2 122 1991
- Ito Y. Miyoshi Y. “Corrosion Protection of Galvanized Steel Sheet-Corrosion Investigation of Field Vehicle and Its laboratory Evaluation Methods” SAE Technical Paper Series 892580
- Hiraya A. et al. “Corrosion Resistance of Znic and Zinc Alloy Plated Steel in Door Hem Flange” CAMP-ISIJ 2 1685 1989
- Hayasi K. Miyoshi Y. Ito Y. #x0201C;Corrosion Protection of Galvanized Steel Sheet-Corrosion Investigation of Field Vehicle” SAE Technical Paper Series 912279 1991
- Nakazawa M. Miyoshi Y. “CORROSION INVESTIGATION FROM 10-YEAR FIELD EXPOSURE VEHICLES” Corrosion and Control of Aluminum and Steel in Lightweight Automotive Applications paper no.95375 NACE 1995
- Miyoshi Y. Ito Y. Soreide L.E. Davidson D.D. “CORROSION PROTECTION FUNCTIONS ZINC COATING ON STEEL SHEET, AS REVEALED BY THE INVESTIGATION OF FIELD CARS AND LABORATORY TEST” 2nd International Conference on Zn and Zinc Alloy Coated Steel Sheet GALVATECH '92 528 Verlag Stahleisen mbH Dusseldorf 1992
- Bryant A.W. et al. “U.S.Automotive Corrosion Trends at 5&6 years” SAE Technical Paper Series 892578 1989
- Bryant A. W. et al. “U.S.Automotive Corrosion Trends Over the Past Decade” SAE Technical Paper Series 950375 1995
- Hedlund S. “Rust Status of Cars with an Anti-Rust Guarantee in the Nordic Countries” SAE Technical Paper Series 932350 1993
- Arimura M. Iwai M. Sakai H. “Field Test Results of Zn-Ni Alloy Electroplated Steel Sheet Formed into Automotive Door and Placed on Vehicle in Okinawa for 5 years” R&D KOBE STEEL ENGINEERING REPORTS 42 2 89 1992
- Kurimoto T. Hoboh Y. et al “Corrosion Performance of Zn-Ni Alloy Plated Sheet Steel in Automotive Body Panels” SAE Technical Paper Series 831837 1983
- Fujita S. Kajiyama H. “Corrosion Product of Steel on Vehicles Used in North America” Corrosion and Control of Aluminum and Steel in Lightweight Automotive Applications paper no.95378 NACE 1995
- Maejima N. Proceeding of 40th Japan Corrosion Conference, C-102 353 1993
- Strom Mats et al. “A Staistically Designed Study of Atmospheric Corrosion Simulating Automotive Field Conditions Using a High Performance Climate chamber-Status Report of Work in Progress” SAE Technical Paper Series 912282 1991
- Baboian Robert “CHEMISTRY AND CORROSIVITY OF THE AUTOMOTIVE ENVIRONMENT” Automotive Corrosion and Protection 6 1 NACE Houston,Texas 1992
- Schumacher W.A. “Proving Ground Vehicle Corrosion Testing” Proceedings of the 2nd Automotive Corrosion Prevention Conference SAE Technical Paper Series 831820 1983
- Van de Streek Gary “Hem flange Evaluation of Corrosion Performance” SAE Technical Paper Series 850565 1985
- Mackay A.L. et al. “β-Ferric Oxyhydroxide Mineral Mag. 32 545 1960
- Misawa T. “Research Status and Unsolved Problems in Rusting of Iron and Steels” CORROSION ENGINEERING 32 657 1983
- Shibata N. et al. Testu-to-Hagane 73 S421 1987
- Shibata N. et al. Testu-to-Hagane 73 S1156 1987
- Feitknecht W. “STUDIES ON THE INFLUENCE OF CHEMICAL FACTORS ON THE CORROSION OF METALS' Chemistry and Industry September 5 1102 1959
- Misawa T. Hashimoto K. Shimodaira S. “On the Mechanism of Iron and Protective Rust Layer on Low Steels” CORROSION ENGINEERING 23 1 17 1974
- Brady R. Yahkind A. et al “Effects of Cyclic Test Variables on the Corrosion Resistance of Automotive sheet Steels” SAE Technical Paper Series 892567 1989