This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Two Stroke Engines With Direct Injection
Annotation ability available
Sector:
Language:
English
Abstract
In order to develop modern two-stroke engines with low fuel consumption, respectively with low exhaust emissions, two alternative development areas - the mixture formation and the scavenging system - have been correlated. For a satisfying mixture formation without fuel losses by scavenging, the direct injection seems to be one of the best solution for the high speed two-stroke engine of the future. On the other hand the modern development of two-stroke scavenging systems shows a large field of application and improvement methods of cross and loop scavenging [1].
Based on the specific optimisation factors of the injection system, respectively of the scavenging system, the aim off this common work of the Universities of Pisa and Zwickau is to correlate both the optimisation fields in an advantageous mixture formation process. The principal elements of this correlation are the design of the combustion chamber, the position of the injection nozzle, the characteristic of the spray jet respectively the direction and velocity of the scavenge air induced into the cylinder.
This paper presents the research co-operation between the mentioned Universities regarding this subject, consisting in the simulation of the flow characteristics of the injected fuel and scavenge air -separately and combined- study which is performed by the CFD code FLUENT.
Recommended Content
| Technical Paper | High Speed Fuel Injection System for 2-Stroke D.I. Gasoline Engine |
| Technical Paper | Injection and Ignition Effects on Two-Stroke Direct Injection Emissions and Efficiency |
Authors
Citation
Franco, A., Martorano, L., Stan, C., and Eichert, H., "Development of Two Stroke Engines With Direct Injection," SAE Technical Paper 951776, 1995, https://doi.org/10.4271/951776.Also In
References
- Blair G.P. “ The Basic Design of Two Stroke Engines ” SAE Publication Series Belfast 1990
- Heywood J. “ Internal Combustion Engine Fundamentals ” Mc Graw Hill International Editions, Automotive Technology Series 1989
- Stan C. “Concepts for the Development of Two Stroke Engines” Proceedings of the 3 rd SETC Pisa 1993
- Kenny R.G. Kee R.J. Carson C.E. Blair G.P. “Application of Direct Air-Assisted Fuel Injection to a SI Cross-Scavenged Two-Stroke Engine” SAE Paper n. 932396 , Transactions of the SAE 1889 1902 1993
- Nuti M. “Direct Fuel Injection: an Opportunity for Two-Stroke SI Engines in Road Vehicle Use” SAE Paper n. 860170 1986
- Sato T. Nakayama M. “Gasoline Direct Injection of a Loop-Scavenged Two Stroke Cycle Engine” SAE Paper no. 871690 1987
- Bartolini C.M Chiatti G. Vincenzi G. “Analysis and Performance of a Two-Stroke Gasoline Engine with Direct Injection” SAE Paper n. 931508; Proceedings of the 3 rd SETC Pisa 1993
- Monnier G. Duret P. Pardini R. Nuti M. “IAPAC Two-Stroke Engine for High Efficiency Low Emissions Scooters” SAE Paper no. 931478, Procedings of the 3 rd SETC Pisa 1993
- Carson C.E. Kenny P.G. Kee R.J. Stan C. Lekmann K. Zwahr S. “Ram-tuned and Air Assisted Direct Fuel Injection Systems Applied to a SI Two-Stroke Engine SAE Paper n. 950269
- Stan C. Kuntscher V. “A New Diesel Mixture Formation Approach for Small High-Speed Two-Stroke Engine Applications” SAE Paper n. 890210 1989
- Amsden A.A. O'Rourke P.J. Butler T.D. “Kiva II: a Computer Program for Chemically Reactive Flows with Spray” Report n. LA-11560 Los Alamos National Laboratory 1989
- Belardini P. Bertoli C. Corcione F.E. Valentino G. “In-Cylinder Flow Measurements by LDA and Numerical Simulation by Kiva-II Code” SAE Paper no. 920155 1992
- FLUENT Program Code, User's Guide Fluent Incorporated Lebanon NH 1995
- Patankar S. “Numerical Heat Transfer and Fluid Flow” Washington D.C. Hemisphere Publishing Company 1980
- Chorin A.J. “Vortex Sheet Approximation of Boundary Layers” Journal of Computer Physics 27 1978
- Pantow. E. Private Communication 1994