This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermal Reliability Prediction of Automotive Electronic Packaging
Annotation ability available
Sector:
Language:
English
Abstract
The paper briefly reviews the current and future needs for automotive electronic packaging technology and the related reliability issues. Reliability approaches based upon physics-of-failure are discussed, and an example is given to illustrate the importance of understanding the root cause of failure and the application of a state-of-the-art approach to life prediction of leadless solder joints under thermal cycling.
An introduction is also given to the recent development of the CAIR (Computer Aided Interconnect Reliability) system developed at Ford for reliability prediction of solder interconnects in automotive electronic packaging. The system integrates a number of software modules using a user interface and allows for evaluation of critical design parameters within a short period of time. The system is intended to implement the “prevention mode” into the product design process to meet the increasing reliability demand and to reduce cost and cycle time.
Recommended Content
Authors
Citation
Pao, Y., Jih, E., and Reddy, V., "Thermal Reliability Prediction of Automotive Electronic Packaging," SAE Technical Paper 950991, 1995, https://doi.org/10.4271/950991.Also In
References
- Belopolsky, Y. Poulin, T. 1991 “Reliability of Electronic Material Systems for Under-the-Hood Automotive Applications,” ASME Winter Annual Meeting, 91-WA-EEP-12 December 1-6 Atlanta, GA.
- de Kluizenaar, E. E. 1990 “Reliability of Solder Joints: A Description of the State of the Art, Part 1,” Soldering & Surface Mount Technology 4 February 27 38
- de Kluizenaar, E. E. 1990 “Reliability of Solder Joints: A Description of the State of the Art, Part 2 5 June 56 66
- de Kluizenaar, E. E. 1990 “Reliability of Solder Joints: A Description of the State of the Art, Part 3 6 October 18 27
- Frear, D. R. Jones, W. B. Kinsman, K. R. 1991 Solder Mechanics - A State of the Art Assessment TMS EMPMD Monograph Series
- Govila, R. K. Jih, E. Pao, Y.-H. Larner, C. 1994 “Thermal Fatigue Damage in the Solder Joints of Leadless Chip Resistors,” ASME Transactions, Journal of Electronic Packaging 116 June 83 88
- Hwang, J. S. 1994 “Overview of Lead-free Solders for Electronics & Microelectronics,” Proceedings of Surface Mount International Conference August 28 September 1 San Jose, CA 405 421
- Jih, E. Pao, Y.-H. 1994 “Evaluation of Critical Design Parameters for Surface Mount Leadless Solder Joints Subjected to Thermal Cycling,” 197 Mechanics and Materials for Electronic Packaging 2 Thermal and Mechanical Behavior and Modeling 213 228
- Lau, J. H. Rice, D. W. 1985 “Solder Joint Fatigue in Surface Mount Technology: State of the Art,” Solid State Technology October 91 104
- Lau, J. H. 1991 Solder Joint Reliability - Theory and Applications Van Nostrand Reinhold New York
- Lau, J. H. 1994 Chip on Board - Technologies for Multichip Modules Van Nostrand Reinhold New York
- Kitano, M. Kumazawa, T. Kawal, S. 1992 “An Evaluation Method for Thermal Fatigue Strength of Solder Joint,” ASME Advances in Electronic Packaging 1 301 308
- Martin, N. 1994 “1995 Electronics Outlook,” Automotive Industries December 76 78
- Minorikawa, H. Suda, S. 1990 “Current Status and Future Trends of Electronic Packaging in Automotive Applications,” Proceedings of the 1990 International Congress on Transportation Electronics 901134 SAE Warrendale, PA 155 163
- Napp, D. 1994 “NCMS Lead-free Electronic Interconnect Program,” Proceedings of Surface Mount International Conference August 28 September 1 San Jose, CA 425 432
- Ono, H. Sawada, Y. Kawai, K. Kagosaki, S. 1994 “Recent Interconnection Technologies of Automotive Electronic,” Proceedings of the 1994 International Congress on Transportation Electronics SAE Warrendale, PA 215 223
- Pao, Y.-H. Badgley, S. Govila, R. Baumgartner, L. Allor, R. Cooper, R. 1992 “Measurement of Mechanical Behavior of High Lead Lead-Tin Solder Joints Subjected to Thermal Cycling,” ASME Transactions, Journal of Electronic Packaging 114 June 135 144
- Pao, Y.-H. Govila, R. Badgley, S. Jih, E. 1993 “An Experimental and Finite Element Study of Thermal Fatigue Fracture of PbSn Solder Joints,” ASME Transactions, Journal of Electronic Packaging 115 March 1 8
- Pao, Y.-H. Badgley, S. Govila, R. Jih, E. 1994 “An Experimental and Modeling Study of Thermal Cyclic Behavior of Sn-Cu and Sn-Pb Solder Joints,” MRS Symposium Proceedings 323 Electronic Packaging Materials Science VII Borgesen P. et al. 153 158
- Pao, Y.-H. Jih, E. Reddy, V. 1994 “Thermal Fatigue Life Prediction of Surface Mount Solder Interconnects: A Design Integrated System Approach,” 195 Mechanics and Materials for Electronic Packaging 1 Design and Process Issues in Electronic Packaging 181 191
- Pao, Y.-H. Jung, W.-J. 1994 “Modeling Thermally Induced Cracking of LCC Solder Joints in Automotive Electronic Packages,” Proceedings of Surface Mount International Conference August 28 September 1 San Jose, CA 73 91 Pecht, M. 1991 Handbook of Electronic Packaging Design Marcel Dekker, Inc. New York
- Plumb, S. E. 1993 “Electronics Marches to Same Drummer,” Ward's Auto World October 37 40
- Sasayama, T. Suzuki, S. Oho, S. 1993 “Sensors for the Future,” Automotive Engineering August 33 37
- Schroeder, S. A. Mitchell, M. R. 1995 Fatigue of Electronic Materials
- Sherry, W. M. Hall, P. M. 1986 “Materials, Structures, and Mechanics of Solder Joints for Surface Mount Microelectronics,” Proceedings, Third International Conference on Interconnection Technology in Electronics Fellbach, Germany February 18-20 47 81
- Uegai, Y. Tani, S. Inoue, A. Yoshioka, S. Tamura, K. 1993 “A Method of Fatigue Life Prediction for Surface-Mount Solder Joints of Electronic Devices by Mechanical Fatigue Test,” ASME Advances in Electronic Packaging 1 493 498
- Wen, L.-C. Ross, R. G., Jr. 1994 “Comparison of LCC Solder Joint Life Predictions with Experimental Data,” ASME Winter Annual Meeting November 6-11 Chicago, IL
- Wesselmann, C. 1994 “So Huge a Market, So Much to Do,” SMT October 12
- Winterbottom, W. L. 1994 “The Automotive Environment: An Electronic Packaging Reliability Challenge,” 195 Mechanics and Materials for Electronic Packaging 1 Design and Process Issues in Electronic Packaging 217 227
- Wong, B. Helling, D. E. 1990 “A Mechanistic Model for Solder Joint Failure Prediction Under Thermal Cycling,” ASME Transactions, Journal of Electronic Packaging 112 June 104 109