This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Capabilities of Moire Interferometry for Automotive Body Panel Inspection
Annotation ability available
Sector:
Language:
English
Abstract
Class A automotive body panel inspection has for years been a subjective endeavor, limited by inconsistencies of the human eye and the inspector's memory of what has been observed in the past. A quantitative, non-contact inspection system based on Moire Interferometry has been developed. The successful application of this technique will be the next step in class A automotive body panel inspection wherein shape differences between a reference panel and production panels can be determined objectively in less than 10 minutes.
Recommended Content
Technical Paper | Quantitative Analysis of Surface Quality for Exterior Body Panels |
Technical Paper | Commercialization of an ELPO Capable, Thermoplastic Polyester Fender Resin |
Technical Paper | TECHNOLOGY FOR BLOW MOLDING CLASS “A” EXTERIOR BODY PANELS |
Topic
Citation
Handley, M., "Capabilities of Moire Interferometry for Automotive Body Panel Inspection," SAE Technical Paper 950920, 1995, https://doi.org/10.4271/950920.Also In
References
- Boehnlein A. Harding K. “Field Shift Moire, a New Technique for Absolute Range Measurement” The Society of Photo-Optical Instrumentation Engineers Bellingham, WA 1989
- Koliopolous, C. Bell, B. “Phase Shifting Moire Interferometry” Topical Meeting on Machine Vision Optical Society of America March 1985
- Boehnlein A. Harding K. “Absolute Measurement Using Field Shifted Moire” The Society of Photo-Optical Instrumentation Engineers Bellingham, WA 1991
- Hung Y.Y. “Three Dimensional Computer Vision Techniques for Full Field Surface Shape Measurement and Surface Flaw Inspection” SAE paper 920246
- Boehnlein A. Harding K. “Adaptation of a Parallel Architecture Computer to Phase Shifted Moire Interferometry” The Society of Photo-Optical Instrumentation Engineers Bellingham, WA 1986
- Dai Y.Z. Chang F.P. “Contouring by Moire Interferometry” Experimental Mechanics 31 1 76 81 Mar. 1991
- Gray T. MacKenzie P. “Fatigue Crack Closure Investigation Using Moire Interferometry” International Journal of Fatigue 12 5 417 423 Sept. 1990
- Boehnlein A. Harding K. “Moire Inspection System” United States April 26 1994
- Hauer M. Harding K. “Design of a Moire Interferometer for Surface Defect Inspection” RIA/ESD Robotics and Vision Conference Detroit, MI June 1990
- Wyant J. C. et.al. “Development of a Three Dimensional Noncontact Digital Optical Profilometer” Journal of Tribology Oct. 1985