This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermomechanical Tests on CMC Samples and Heat Shingle in Oxidizing Environment
Annotation ability available
Sector:
Language:
English
Abstract
On three different materials, C/C, C/SiC and SiC/SiC, bending tests under thermo-mechanical cycles have been performed, in accordance with the thermal load conditions of hypersonic launch and re-entry. The samples have been manufactured with oxidation protective coatings in order to investigate also the effect of oxidizing environment.
In order to assess the influence of initial defects the test samples have been prepared with different drilled holes. Thereby, high sensitivity with respect to the initial defect size can be stated.
Eventually, as an actual structural component a C/SiC heat shingle has been manufactured and is going to be validated.
Citation
Trabandt, U., Becker, W., and Pradier, A., "Thermomechanical Tests on CMC Samples and Heat Shingle in Oxidizing Environment," SAE Technical Paper 941582, 1994, https://doi.org/10.4271/941582.Also In
References
- Trabandt, U. Becker, W. Vogel, W. Kerfin, W. Le Floc'h, C. Kornmann, M. Touanen, M. Integrity Control for High Temperature Structural Applications Phase I. Final Report ESA Contract No. 8807/90/NL/PP(SC) November 1993
- Becker, W. Kerfin, W. Trabandt, U. Vogel, W. Integrity Control for High Temperature Structural Applications Proceedings of the 3rd European Conference on Advanced Materials and Processes Paris 8th-10th June 1993
- Becker, W. Helwig, G. Micromechanical Optimization of the Macromechanical Performance of Ceramic Matrix Composites Proceedings of the 6th European Conference on Composite Materials - High Temperature Ceramic Matrix Composites Bordeaux 20th - 24th September 1993
- Trabandt, U. Becker, W. Kienzler, J. Schmid, T. Design of Hot Structures of Short Cycle Manufactured CMC Proceedings of the 6th European Conference on Composite Materials - High Temperature Ceramic Matrix Composites Bordeaux 20th - 24th September 1993
- Kerfin, W. Test of Preselected NDI Methods Technical Note DL-TN-IC-004 Dornier Luftfahrt GmbH Friedrichshafen, Germany
- Le Floc'h, Ch. NDI Qualification Technical Note, Aerospatiale Acquitaine November 1992
- Awerbuch, J. Madhukar, M. S. Notched Strength of Composite Laminates: Predictions and Experiments - A Review Journal of Reinforced Plastics and Composites 4 1985
- Waddoups, M. E. Eisenmann, J.R. Kaminski, B. E. Macroscopic Fracture Mechanics of Advanced Composite Materials Journal of Composite Materials 5 1971 446 454
- Whitney, J. M. Nuismer, R. J. Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations Journal of Composite Materials 8 1974 253 265
- Karlak, R. R. Hole Effects in a Related Series of Symmetrical Laminates Proceedings of Failure Modes in Composites, IV The Metallurgical Society of AIME Chicago 1977 105 117
- Pipes, R. B. Wetherhold, R. V. Gillespie, J. W. Notched Strength of Composite Materials Journal of Composite Materials 12 1979 148 160