This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dew Point Analysis Developments for Space Station
Annotation ability available
Sector:
Language:
English
Abstract
This paper reviews the recent G189A computer program developments in the area of humidity control for the U.S. Lab Module in the Space Station. The humidity control function is provided as an indirect or passive function by the Common Cabin Air Assemblies (CCAA) in pressurized elements or modules in the Space Station. The CCAAs provide active cabin temperature control through implementation of a digital/electromechanical control system (i.e., a proportional/integral (PI) control system). A selected cabin temperature can be achieved by this control system as long as the sensible and latent heat loads are within specified limits.
In this paper three pertinent analytical cases directed to determining minimum or maximum dew point temperatures are discussed. In these cases the basic sensible heat loads are set at constant values. The sources of water vapor in the module include: 1) the crew activity timeline with variations in metabolic heat load, 2) the cyclic operation of the Carbon Dioxide Removal Assembly (CDRA) which alternately removes water vapor from the cabin (along with CO2) at a steady rate and subsequently returns water vapor to the cabin as a pulse, 3) operation of Crew Systems equipment (such as the handwash facility or the shower) on its timelines. Since the sources of water vapor are all time varying, it is evident that the issue of extreme cabin dew point temperatures requires a transient analysis.
Prior to discussing the three analytical cases considered here, discussions of the operations and of the thermodynamic principles involved in the performance of the CCAA and the CDRA are included. Also, the interactions of the CDRA and CCAA are discussed. The results of the three analytical cases are presented. It is shown that for the present design performance modeling and data for the CCAA and the CDRA and the sensible and latent loads imposed on the system considered here the specified minimum and maximum limits on cabin humidity can be accommodated.
©1994. The Boeing Company. All rights reserved. This work performed under contract for NASA.
The Space Station requirement that the Environmental Control and Life Support System (ECLSS) equipment and other equipment be capable of surviving a laboratory module depressurization/repressurization event must be dealt with analytically. The depressurization process includes condensation of water vapor followed by freezing. These change-of-phase processes have been included in the G189A program's simulation logic. An example analysis of a Lab Module depressurization event has been run and the results are included here. The condensation and freezing effects are noted.
Authors
Citation
Barker, R. and Sitter, G., "Dew Point Analysis Developments for Space Station," SAE Technical Paper 941511, 1994, https://doi.org/10.4271/941511.Also In
References
- Barker, R.S. Blakely, R.L. Hamill, T.D. Nicol, S.W. “G189A Generalized Environmental/Thermal Control and Life Support Systems Computer Program -Program Manual,” McDonnell Douglas Corp. Report MDAC G2444 September 1971
- Miller, M. Daigle, W. Plunkett, T. “Temperature and Humidity Control Subsystem Envelope Drawing,” Boeing Report 683-10006(d) January 1993
- Bird, C. O'Connor, E. “Space Station Temperature and Humidity Control Dynamic Control Analysis: Response to Action Item 45 and Hab/Lab Model Updage,” Hamilton Standard Internal Correspondence 1 8 92
- Barker, R.S. Jouanne, R.G. von “Preliminary G189A Computer Program Modeling of the Space Station ECLSS,” SAE 891499 July 1989
- Barker, R.S. von Jouanne, R.G. “Application of a Comprehensive G189A ECLSS Model in Assessing Specific Space Station Conditions,” SAE 901265 July 1990
- Barker, R.S. von Jouanne, R.G. “Development of a G189A Model of the Space Station Freedom Atmosphere,” SAE 911469 July 1991
- von Jouanne, R.G. Barker, R.S. Sitler, G.A. “Dew Point Analysis for Space Station Freedom,” SAE 921227 July 1992
- Bird, C. Barker, R.S. “Temperature and Humidity Control System Dynamic Performance Analysis,” SAE 932189 July 1993
- Shapiro, A.H. “The Dynamics and Thermodynamics of Compressible Fluid Flow,” I 203 205 Ronald Press Company 1953