This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling of Corrosion of Cylinder Liner in Diesel Engines Caused by Sulphur in the Diesel Fuel
Annotation ability available
Sector:
Language:
English
Abstract
Due to increasing problems with corrosive wear in marine Diesel Engines, caused by sulphuric acid, it is necessary to understand the mechanism of corrosion. Based on experience with large marine diesel engine operation, a mechanism model is proposed and verified by comparison with practical experience. From operation of engines it is known that the corrosion problem is most severe where the lubrication of the liner is most unsatisfactory. Therefore, most effort is put into modelling the formation and transportation of acid in the lubricant film area. Results from modelling the risk of corrosion during different engine operation conditions are presented.
Recommended Content
Citation
Schramm, J., Henningsen, S., and Sorenson, S., "Modelling of Corrosion of Cylinder Liner in Diesel Engines Caused by Sulphur in the Diesel Fuel," SAE Technical Paper 940818, 1994, https://doi.org/10.4271/940818.Also In
References
- McGeehan, J.A. Kulkarni, A.V. “Mechanisms of Wear Control by Lubricant in Diesel Engines” SAE paper no. 872029 1987
- van Helden, A.K. “A Physio-chemical Model of Corrosive Wear in Low-Speed Diesel Engines” CIMAC Conference Report D-9 1987
- Dilks, A. Heron, B. “Cylinder Lubrication for Low-Speed Marine Diesel Engines” Shell Marine Service Worldwide Publication 1989
- Akiyama, K. et. al. “Cylinder Wear Mechanism in an EGR-Equipped Diesel Engine and Wear Protection by the Engine Oil” SAE Paper no. 872158 1987
- Weiss, E.K.J. et. al. “Diesel Sulphur and Cylinder Liner Wear of a Heavy-Duty Diesel Engine” SAE Paper no. 872148 1987
- Yahagi, Y. “Corrosive Wear of Diesel Engine Cylinder Bore” Tribology International 20 365 1987
- van Helden, A.K. et. al. “Corrosive Wear in Crosshead Diesel Engines” Tribology International 22 189 1989
- Nagaki, H. Korematsu, K. “Relation Between Diffusion Process of Sulfur Oxides in Exhaust Gas into Oil Film and Wear of Cylinder Liner and Piston Rings in Diesel Engines” SAE Paper no. 912400 1991
- Moore, S. “The Measurement of Piston Ring Oil Film Thickness in a Two-Stroke Marine Diesel Engine” Proceedings of CIMAC Conference London 1993
- Pedersen, P.S. “Process Simulations” The Motor Ship, A Special Survey. The M & G Programme L-MC L-GB 5 10 December 1982
- Teetz, C. 1984
- Behrens, R. Groth, K. “Problems Caused by Burning Heavy Fuels in Diesel Engines” Diesel Engine Combustion Chamber Materials for Heavy Fuel Operation, Paper 3, Marine Managements 1990
- Wilke, C.R. Chang, P. Journal of Am. Inst. Chem. Eng. 1 264 1955