This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fatigue Properties of an A356 (AlSi7Mg) Aluminium Alloy for Automotive Applications - Fatigue Life Prediction
Annotation ability available
Sector:
Language:
English
Abstract
The fatigue properties of an A356(AlSi7Mg) alloy have been investigated. Both materials free from and containing casting defects have been compared.
In the defect free material persistent slip bands (PSBs) are formed in the inter-dendritic triple points. By extrusion, however, the inter-dendritic distribution of primary silicon particles is replaced by an almost uniform distribution of smaller Si particles. Persistent slip bands are formed near the primary Si particles and an increase in the density of PSBs are observed resulting in a more homogeneous distribution of the strain. A significant increase in fatigue life is measured.
Material containing pores shows approximately 50% reduction in fatigue life compared to the defect free material, and the fatigue strength at 107 cycles is reduced by 20%. Cracks are initiated from the casting defects and most of the fatigue life is spent in the fatigue crack growth regime.
A model has been used to predict the fatigue life. When assuming simultaneous crack initiation from three pores located 0.7 mm apart from each other on the same plane and that these cracks are growing together and forming the final crack, a good correlation is found between the predicted and the measured fatigue life.
Recommended Content
Technical Paper | A Study on the Chrome Platability of Cast Aluminum Wheels |
Technical Paper | Gas Free/Squeeze Cast Aluminum Wheels |
Technical Paper | Quantification of Variability on the Prediction of Weld Durability in Automotive Components |
Authors
Citation
Ødegård, J. and Pedersen, K., "Fatigue Properties of an A356 (AlSi7Mg) Aluminium Alloy for Automotive Applications - Fatigue Life Prediction," SAE Technical Paper 940811, 1994, https://doi.org/10.4271/940811.Also In
References
- Honma, U. Kitaoka, S. 1984 Fatigue Strength and Mechanical Properties of Aluminium Alloy Castings of Different Structural Fineness Aluminium 60 12 917 920
- Inguanti, P.C. 1985 Cast Aluminium Property/Microstructure Relationships Proc. 17th National SAMPE Technical Conference Oct. 22-24
- Ozelton, M.W. Turk, G.R. Porter, G.R. 1988 Relationships Between Mechanical Properties, Composition and Microstructure of the Aluminium Casting Alloy A357-T6 Techn. for Premium Quality Castings 81 105
- Ødegård, J.A. Hafsås, J.E. Pedersen, K. 1990 Fatigue Crack Initiation and Growth in a DC-cast AlSi7Mg Alloy proc. FATIGUE 90 I 273 278
- Ødegård, J.A. 1992 Fatigue behaviour in a DC cast A356(AlSi7Mg) Al casting alloy Division of Metallurgy Norwegian Institute of Technology Trondheim
- Benum, S.J. 1991 Effects of pores on the fatigue properties of cast AlSi7Mg(0,4) alloy Division of Metallurgy Norwegian Institute of Technology Trondheim
- Plumtree, A. Schäfer, S. 1986 Initiation and Short Crack Behaviour in Aluminium Alloy Castings” proc. The Behaviour of Short Fatigue Cracks 215 227
- Couper, M.J. Neeson, A.E. Griffiths, J.R. 1990 Casting defects and the fatigue behaviour of an aluminium casting alloy Fatigue Fracture Engng Mater. Structures 13 213 227
- Ødegård, J.A. Roven, H.J. Pedersen, K. 1991 The Effect of Artificial Aging on Fatigue Behaviour in a DC-cast A356 (AlSi7Mg) Alloy” Conf. Proc. ICM-6 2 439 444
- Parker, B.A. Saunders, D.S. Griffiths, J.R. 1982 The Quanitative Evaluation of the Microstructure of a Strontium-Modified Al-Si-Mg Alloy Following Prolonged Solution Treatment Metals Forum 5 1 48 53
- Arsenault, R.J. Shi, N. Feng, C.R. Wang, L. 1991 Localized Deformation of SiC-Al Composites Materials Science and Engineering 55 68
- Skallerud, B. Iveland, T. Härkegård, G. 1993 Fatigue Life Assessment of Aluminum Alloys with Casting Defects Engineering Fracture Mechanics 44 6 857 874
- Günggör, S. Edwards, L. 1993 Effect of Surface Texture on Fatigue Life in a Squeeze-cast 6082 Aluminium Alloy Fatigue Fract. Engng. Mater. Struct. 16 4 391 403
- Paris, P.C. Erdogan, F. 1963 A Critical Analysis of Crack Propagation Laws Trans. ASME J. Basic Eng. 85 528 534
- Haddad, M.H. El Smith, K.H. Topper, T.M. 1979 Fatigue crack propagation of short cracks J. Engng. Mater. Technol. 101 42