This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diesel Electro-injector:A Numerical Simulation Code
Annotation ability available
Sector:
Language:
English
Abstract
A simulation code of an electro-injector for Diesel engines is presented with the preliminary parametric analysis carried out with the code. The simulation code is based upon the concentrated volume method as for the chambers of the system. Energy and flowrate conservation equations and dynamic equations are used for the movable parts of the system under stress or friction. The magnetic force acting on the electro-injector actuator has been calculated by means of a Finite Element simulation. The one-dimentional code simulated the propagation in feeding pipes and the control of the electro-injector. The program, infact, uses the method of the characteristic equations to solve conservation equations, simulating the propagation in a pipe between two chambers.
The sensitivity analysis has pointed out that the parameters which are influenced by the propagation in the pipes are: needle lift, injected flow-rate, pressure in each chamber and volume. The perturbations reduce the effective pressure of injection and are influenced by pipe lenghts and diameters.
Recommended Content
Authors
Citation
Digesu, P., Ficarella, A., Laforgia, D., Bruni, G. et al., "Diesel Electro-injector:A Numerical Simulation Code," SAE Technical Paper 940193, 1994, https://doi.org/10.4271/940193.Also In
References
- Kato, T. Tsujimura, K. Shintani, M. Minami, T. Yamaguchi, I. “Spray Characteristics and Combustion Improvement of D.I. Diesel Engine With High Fuel Injection” SAE Paper No. 890265 1989
- Okajima, M. Kato, M. Kano, H. Tojo, S. Katagiri, M. “Contribution of Optimum Nozzle Design to Injection Rate Control” SAE Paper No. 910185 1991
- Matsuoka, S. Yokota, K. Kamimoto, T. Igoshi, M. “A Study of Fuel Injection System in Diesel Engines” SAE Paper No. 851583 1989
- Ficarella, A. Laforgia, D. “Fluid dynamic Phenomena in Fuel-injection Systems” MTZ 52 1 1991 28 35
- Ficarella, A. Laforgia, D. “Contribution to the Simulation of Injection System for Reciprocating I.C. Engine” SAE Paper No. 885016 1988
- Ficarella, A. Laforgia, D. “Investigation and Computer Simulation of Diesel Injection System with Rotative Pump” ASME Journal of Engineers for Gas Turbine and Power July 1990 112 317 323
- Ficarella, A. Laforgia, D. “Injection Characteristics Simulation and Analysis in Diesel Engines” Meccanica, International Journal of AIMETA Kluwer Academic Publishers 28 239 248 1993
- Catania, A.E. Dongiovanni, C. Mittica, A. “Implicit Numerical Model of a High Pressure Injection System” ASME Journal of Engineering for Gas Turbine and Power 114 534 543
- Ricco, M. Bruni, G. “Magnetic Force and Inductance Optimization of Electroinjector Magnetic Circuit” Ansys Technology Conference and Exhibition Pittsburg U.S.A. June 8 12 1992
- Schmitt, Th. “Untersuchungen zur Stationaren und Instationaren Stromung durch Drosselquerschnitte in Kraftstoffeinspritzsystemen von Dieselmotoren” Forschungsbericht 1966
- Gibson, D.H. “A Flexible Fuel Injection Simulation” SAE Paper No. 861567 1986
- Hardenberg, H. “Die Nadelhubabhaug_ igkeit der Dyrchfluβbeiverte von Lochdusen für Direkteinspritz_ dieselmotoren” MTZ 46 4 1985
- Andoh, H. Shiraishi, K. “Influence on Injection and Combustion Phenomena by Elimination of Hole Nozzle Sac Volume” SAE Paper No. 860416 1986
- DERECO “Experimental Evaluation of Flow Coefficient of Fuel Injectors at Different Pressure Drop, Backpressure and Needle Lift” Technical Report n. 185/85 1985
- Pischinger, R. Staska, G. Gao, Z. “Berechnung des Einspritzeverlaufes von Dieselanlangen bei Kavitation” MTZ 44 1983 11
- Parson, M. G. Harkins, R. W. “Investigation of Fuel Injection System Cavitation Problems on the MV J. R. Baker, MV M. Miner, and MV W. R. de Lancey” Marine Tecnology 22 3 219 237 1985
- Marcic, M. Kovacic, Z. “Computer Simulation of the Diesel Fuel Injection System” SAE Paper No. 851583 1985
- Buchlin, J. M. “Two Phase Flow” Course Note 131/EA VKI Bruxelles Oct. 1988