This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimum Injection Timings of Gas-Oil and Methanol in Dual Fuel CI Engine
Annotation ability available
Sector:
Language:
English
Abstract
The engine performance, combustion characteristics and the effect of injection timing differences of a prechamber-type diesel engine operated by Diesel-fuel and methanol were investigated. When the Diesel-fuel is used as a pilot fuel, the ignition lag was mainly controlled by the Diesel-fuel.
The maximum thermal efficiency occurs with the optimum main methanol injection timing. The optimum methanol injection timing is about 2 to 3 degrees crank angle before the ignition, as methanol vapor is required for smooth combustion. This was determined from results showing that the methanol combustion was initiated by flame propagation from the combustion of Diesel-fuel. It is advantageous that parts of the Diesel-fuel and methanol sprays be mixed.
Recommended Content
Authors
Topic
Citation
Enoki, K., Hayashi, S., and Sawa, N., "Optimum Injection Timings of Gas-Oil and Methanol in Dual Fuel CI Engine," SAE Technical Paper 932479, 1993, https://doi.org/10.4271/932479.Also In
References
- Murayama, T. et al. 8 th. ISAF 1988 495
- Lauson, A. et al. SAE Paper, NO. 790925 1979
- Jaye, J. et al. 8 th. ISAF 1988 547
- Hardenberg, H. O. SAE Paper, NO. 872039 1987
- Pischinger, F. et al. 6 th. ISAFT 1 1984
- Murayama, T. et al. JSME 47 417 1981
- Ullmann, T.L. et al. SAE Paper, NO. 820966 1982
- Kato, S. et al. SAE Paper, NO. 871689 1987
- Kroeger, C. SAE Paper, NO. 861169 1986
- Jacson, M. D. et al. SAE Paper, NO. 850216 1985
- Seko et al.
- Kajitani, S. Sawa, N. JSME 56 531 1990
- Wing., R.D. Proc. Inst. Mech. Eng. 198 50 57 1975
- Ohoi Sankaido, Heat Engine-6, Diesel engine 1956
- Bosch, W. SAE Paper, 660749 1966
- Ishikawa Maruzen Theory of Mixture Viscosity 1968
- Hori et al. Sankaido I C E 20 256 1981
- Alkidas, C. A. Trans. ASME 109 10 1987
- Terao et al. JSME 21 104 1955 282 285
- Miyamoto et al. JSME 42 364 1976 3994
- Miyake, M. et al. 15 th CIMAC Paris 1985 1197
- Yanagihara, H. et al. 7 th. Int. Sympo. on AF 1988 619
- Kobayakawa et al. Sankaido ICE 18-230 1979 25 20-246 1981 25
- Makihara et al. JSME 55 514 1989
- Horiguti, Sankyo Shuppan K.K., Chemistry of Lubricating Oil 1962 77