This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Quantitative Assessment of the Influence of Calcium Additions on Tool Wear in 8620 Steel
Annotation ability available
Sector:
Language:
English
Abstract
The effect of calcium additions on the tool wear behavior of a series of SAE 8620 bar steels has been investigated. Of particular interest in this study was the influence of Ca additions on: (1) the stereological parameters of the non-metallic inclusions, and (2) the quantitative evaluation of the machinability behavior (B-index) of the steels using the Volvo tool wear test. The results of this investigation have revealed a linear relationship between the machinability of the workpiece (B-index) and certain non-metallic inclusion stereological parameters (ISP).
Authors
Citation
Pytel, S., Garcia, C., DeArdo, A., and Eriksson, U., "Quantitative Assessment of the Influence of Calcium Additions on Tool Wear in 8620 Steel," SAE Technical Paper 930964, 1993, https://doi.org/10.4271/930964.Also In
References
- Armarego E.J.A. Brown R.H. The Machining of Metals 1969 Prentice-Hall, Inc. Englewood Cliffs, New Jersey 207 254
- The Making, Shaping and Treating of Steel Ninth 1971 USS Corporation 51 1275 1294
- Doyle L.E. et al. Manufacturing Processes and Materials for Engineers Third 1985 Prentice Hall, Inc. Englewood Cliffs, New Jersey 07632 452 632
- Ludema K.C. et al. Manufacturing Engineering-Economics and Processes Prentice-Hall Inc. 1981 Englewood Cliffs, New Jersey 07632 9 215 284
- Tool and Manufacturing Engineers Handbook I - Machining Fourth 1983 SME Dearborn, Michigan 48128 1-1 1-63
- Standard of Volvo Concern, “Test Method of Machinability for Steel, Nickel, Cobalt and Titanium Alloys, STD 1018, 718
- Pytel S.M. Rudnik S. Proceedings of the International Conference on Processing, Microstructure and Properties of Microalloyed and other Modern High Strength Low Alloy Steels Pittsburgh June 1991 Iron and Steel Society, Inc. Warrendale, PA 15086 13 23
- Riboud P.V. Motte J.P. Steel Desulphurization in the Ladle and Calcium Treatment, McMaster Symp. Hamilton, Canada May 1979 10 32
- Tahtinen K. et al. “Ladle Injection-a Way to Continuously Cast Aluminum-Killed Steels for Billets at Ovako” Proceedings of Second International Conference on Injection Metal lurgy Lulea, Sweden June 1980
- Tipnis V.A. Proceedings of an International Symposium “Sulfide Inclusions in Steel” November 1974 ASM Metals Park, Ohio 44073 480 495
- Vander Voort G.F. Research Memorandum “Literature Review: Influence of Calcium Treatment on Machinability” May 26 1983
- Mauti R. SAE Technical Paper Series, No. 910147
- Opitz H. König W. Archiv.für das Eisenhüt-tenwesen, Heft 12 33 December 1962 831 839
- König W. Industrie Anzeiger 87 1965
- Wicher A. Radex Rundschau April 1965 2 432 438
- Kiessling R. Non-metallic Inclusions in Steel The Metals Society London 1974
- Vaccari J.A. Free-Machining Steels, Special Report 790, American Machinist and Automated Manufacturing October 1986
- Pastorek R.L. Mechanical Working and Steel Processing XIX AIME 1981 112 131
- Sata T. et al. Bulletin of the Japan. Society of Prec. Eng. 3 1 1969 1 24
- Fujirawa T. et al. Proceedings of Int. Symposium on Influence of Metallurgy on Machinability of Steel Tokyo September 26-28 1977 129 137
- Faulring G.M. Farrell J.W. Hilty D.C. Iron and Steelmaker February 1980 14
- Gatellier C. at al. Circulaire d'Informations Techniques 1977 34 2 393 411
- Forster E. at al. Stahl und Eisen 1974 31 10 2295 2314
- The Machinability Institute Data Base TMI Pittsburgh, PA 15328 1992