This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Turbulence Effects on Developing Turbulent Flames in a Constant Volume Combustion Chamber
Annotation ability available
Sector:
Language:
English
Abstract
High speed Schlieren video and pressure trace analyses were used to study the turbulence effects on burning velocities in a constant volume combustion chamber. Propane-air and methane-air mixtures of equivalence ratios between 0.75 and 0.96 were ignited at 101 kPa and 296 K. Schlieren images of flame growth were recorded on video at 2000 frames per second while combustion chamber pressure was simultaneously recorded. Turbulence at ignition was up to 7 m/s intensity with 2 mm or 8 mm integral scale, produced by pulling a perforated plate across the chamber prior to ignition. In the analysis, the turbulence parameters during combustion were adjusted for the effect of decay and rapid distortion in a closed chamber.
Results of both video and pressure trace analyses show a linear relationship between turbulent burning velocity and turbulence intensity as expected. Moderate changes in equivalence ratio from 0.75 to 0.96 and change of fuel from propane to methane had negligible effects on this relationship when normalized by laminar burning velocity. In studying the flame growth from the ignition spark up to 55 mm flame radius, it was found that the effectiveness of turbulence increased dramatically as the flame grew. The relationship of turbulent burning velocity to turbulence intensity remained linear, but the linear coefficient increased proportionally with flame size. This linear coefficient can be expressed as a linear function of flame radius. The linear function remained consistent for a given integral scale, regardless of fuel type and equivalence ratio changes. However, increasing the turbulence integral scale makes the turbulence less effective for a given flame size. In short, small scale turbulence (Λ ≈ 2 mm) is more effective in enhancing the burning velocity of a growing flame than larger scale turbulence (Λ ≈ 8 mm) at the same intensity.
For small flame kernels, the increasing turbulence effectiveness has been attributed to the flame kernel growing large enough to be affected by all turbulence scales. For flames much larger than the turbulence scale, the continued increase is attributable to the increasing flame surface corrugation. Larger flames have a longer history of turbulence effect and a greater surface to volume ratio. It is clear that great care must be taken to account for changes in turbulence intensity, turbulence scale, and flame size during experiments to produce meaningful and consistent results.
Recommended Content
Technical Paper | Turbulence Properties of High and Low Swirl In-Cylinder Flows |
Technical Paper | An Investigation into Turbulence in Engines using Scanning LDA |
Technical Paper | A Method for Evaluating Fully Developed Turbulent Flame Speed |
Citation
Checkel, M. and Ting, D., "Turbulence Effects on Developing Turbulent Flames in a Constant Volume Combustion Chamber," SAE Technical Paper 930867, 1993, https://doi.org/10.4271/930867.Also In
References
- Ting D.S-K. Turbulent Flame Growth in a Combustion Chamber with Homogeneous Decaying Turbulence MSc Thesis Mechanical Engineering Department, University of Alberta 1992
- Reynolds W.C. “STANJAN, An Interaction Program for Equilibrium Analysis by the Method of Element Potentials” Mechanical Engineering Department, Stanford University 1987
- Checkel M.D. Ting D.S-K. “Measuring Turbulent Flame Growth By Visualization” 1992 SAE International Congress & Exposition paper 920184 Feb 1992
- Checkel M.D. “Measurement of Turbulence Behind 60% Solid Perforated Plates” ASME Trans., J. of Fluids Engineering March 1986
- Groff E.G. Matekunas F.A. “The Nature of turbulent Flame Propagation in a Homogeneous Spark-Ignited Engine SAE paper 800133 1980
- Chew T.C. Britter R.E. “Effect of Flame-Induced Geometrical Straining on Turbulence Levels in Explosions and Common Burner Configurations” Int. J. Engng Sci. 30 8 983 1002 1992
- Chen C. Veshagh A. “A Refinement of Flame Propagation Combustion Model for Spark-ignition Engines” SAE paper 920679 1992
- Chen C. Veshgah A. “A Premixed Turbulent Flame Velocity Model Based on Dimensional Reasoning” SAE paper 910077 1991
- Abdel-Gayed R.G. Bradley D. “A Two-Eddy Theory of Premixed Turbulent Flame Propagation” Phil. Trans. R. Soc. London 1 25 1981
- Baritaud T.A. “Combustion and Fluid Dynamic Measurements in a Spark Ignition Engine: Effects of Thermochemistry and Velocity Field; Turbulent Flame Speeds” SAE paper 892098 1989
- Herweg, Begleris Zettlitz Ziegler “Flow Field Effects on Flame Kernel Formation in a Spark-Ignition Engine” SAE paper 881639 1988
- Witze P.O. Hall M.J. Bennett M.J. “Cycle-Resolved Measurements of Flame Kernel Growth and Motion Correlated with Combustion Duration” SAE paper 900023 1990
- Ballal D.R. Lefebvre A.H. “The Structure and Propagation of Turbulent Flames” Proc. R. Soc. Lond. 217 234 1975
- Santavicca D.A. Liou D. North G.L. “A Fractal Model of Turbulent Flame Kernel Growth” SAE paper 900024 1990
- Abdel-Gayed R.G. Bradley D. Lawes M. “Turbulent Burning Velocities: a general correlation in terms of straining rates” Proc. R. Soc. Lond. 389 413 1987
- Abdel-Gayed R.G. Bradley D. Lawes M. Lung F.K-K. “Premixed Turbulent Burning During Explosions” Twenty-first Symposium (International) on Combustion/The Combustion Institute 497 504 1986
- Thomas A. “The Development of Wrinkled Turbulent Premixed Flames” Combustion and Flame 65 291 312 1986
- Abdel-Gayed R.G. Bradley D. Hamid M.N. Lawes M. “Lewis Number Effects on Turbulent Burning Velocity” Twentieth Symposium (International) on Combustion/The Combustion Institute 505 512 1984