This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Spray Measurement and Visualization of Gasoline Injection for 2-Stroke Engine
Annotation ability available
Sector:
Language:
English
Abstract
In a two-stroke gasoline engine, the in-cylinder spray pattern and fuel atomization of an air-assisted fuel injection system is analyzed. The visualization of the spray inside of the cylinder is achieved by taking photographs through endoscope mounted in the cylinder head viewing the cylinder. The interaction between the fuel spray and in-cylinder flow motion is thus observed.
The spray droplet size is measured by a PDPA(Phase Doppler Particle Analyzer) in an open chamber test rig. The results show that air-assisted fuel-injection system achieves much better atomization than the traditional low-pressure solid fuel injection system. The droplet size at the center of spray plume decreases with the increase of fuel injection rate. Also, the optimal air injection timing relative to the fuel injection timing on the droplet size is also investigated.
Authors
Topic
Citation
Wang, W. and Peng, Y., "Spray Measurement and Visualization of Gasoline Injection for 2-Stroke Engine," SAE Technical Paper 930496, 1993, https://doi.org/10.4271/930496.Also In
References
- Laforgia D. Chehroudi B. Bracco F.V. “Structure of spray from fuel injectors-part II, the Ford DFI-3 Fuel Injector” SAE 890313 1989
- Talley D.G. Lin Y.L. Morris M. “2-D Laser Sheet visualization of pulsed hollow cone spray:stagnant and simulated two-stroke engine environments” Atomization and Spray, Vol 1 89 112 1991
- Karimi E.R. “High-speed photography of fuel spray and combustion events in a production diesel engine and combustion bomb.” J. of Power Engineering, Vol 203 1989
- Lee D.W. “Fuel-spray formulation,” Trans. ASME, Vol. 54 1932
- Bachalo W.D. Houser M.J. Smith J.N. “Evolutionary behavior of spray produced by pressure atomizers” AIAA86-0296 1986
- Mao C.P. Oechsle V. Chigier N. “Drop size distribution and air velocity measurements in air assist swirl atomizer sprays” presented at combustion institute Central and Western States Section Joint Technical Meeting San Antonio, Texas 1986
- Huang Huei-Huay Peng Yu-Yin Jeng Ming- Hong Wang James H. “Study of small two-stroke engine with low-pressure air-assisted direct-injection system” SAE 912350 1991