This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of Acoustic Holography to Measurement of Noise on an Operating Vehicle
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes a feasibility study of the acoustic holographic method to identify a noise source on an operating vehicle. A new acoustical holography method applicable to identification of a nonstationary noise source was assessed and developed. Based on the new method, a measurement system was made and applied to quantification of the noise source in the vehicle. The method was evaluated first for source identification capablity and confirmed by loudspeakers. The experimental approach was then applied to identify the location of vehicle tire noise under various steady state conditions. In this paper, an identification method of noise sources with relatively high power level is presented and the relationship between locations of tire noise sources under various operating conditions investigated. It was verified that this system was effective for the identification of not only ideal point acoustic sources such as loudspeakers, but also complex spatial and phase wavefronts generated from operating vehicles.
Authors
Topic
Citation
Sakamoto, I. and Tanaka, T., "Application of Acoustic Holography to Measurement of Noise on an Operating Vehicle," SAE Technical Paper 930199, 1993, https://doi.org/10.4271/930199.Also In
References
- Watoson, E. E. Detection of acoustic sources using long-wavelength acoustical holography J. Acoust. Soc. Am. 54 3 1973 685
- Umezawa, K. Ueha, S. Ishikawa, J. Tsujiuchi, J. Hojo, H. Fujinami, M. Prepr. Jpn. Soc. Mec. Eng. 750-9 1977-8 171
- Oka, Y. Akashi, K. Yamamoto, T. Noise Source Detection by Acoustical Holography (Part 1) Proc. Acoust. Soc. Jpn. I 1978-3 1
- Oka, Y. Akashi, K. Yamamoto, T. Noise Source Detection by Acoustical Holography (Part 2) Proc. Acoust. Soc. Jpn. I 1978-3 3
- Hayashi, T. Oowa, Y. Nogiwa, Y. An Equipment to detect Noise Source based on the Acoustical Holography Method Proc. Acoust. Soc. Jpn. II 1978-10 3
- Umezawa, K. Hojo, H. Research on the sound Causes of a Gear Unit Trans. Jpn. Soc. Mech. Eng. 47 413 C 1981 57
- Umezawa, K. On the Acoustical Holography Applied to the sound Causes of a Gear Unit Bill. Jpn. Soc. Proc. Engg. 17 2 1983 87
- Sawai, S. Takahashi, K. Isobe, K. Noise Source Detection by Acoustical Holography Proc. Jpn. Soc. Automobile Eng. 862 1986 541
- Takeda, H. Research on Acoustical Holography Trans. Jpn. Soc. Mech. Eng. 51 468 C 1985 2409
- Takeda, H. Research on Acoustical Holography Trans. Jpn. Soc. Mech. Eng. 52 481 C 1986 2409
- Takeda, H. Detection of Noise Sources by Highly Acoustical Holography JSME Int. J. 30 263 1987 822
- Sakamoto, I. Tanaka, T. Murakami, T. Mori. S. Ogata, S. Proc. 20th Traffic Safety and Nuisance Res. Inst. 1990-12 155
- Tanaka, T. Murakami, T. Sakamoto, I. Mori. S. Ogata, S. Analyses of the Effect of Noise Reduction Measure Installed under a Truck Rear body Proc. Jpn. Soc. Automobile Eng. 911 1991 -5 451
- Takeda, H. Oka, F. Iwaki, T. Research on Detection of Moving Noise Sources by Acoustical Holography Method Proc. Jpn. Soc. Mech. Eng. 910-17 C 1991 324
- Morse, P.M. Ingard, K.U. THEORETICAL ACOUSTICS McGraw-Hill 1968 717
- Tanaka, T. Sakamoto, I. Murakami, T. Mori. S. Ogata, S. Measurement of Tyre/Road Noise of a Running Vehicle by Acousitcal Holography Proc. Inter-noise '91 II 1991 1081
- Oshino, Y. Tachibana, H. Noise source identification on rolling tires by sound intensity measurement J. Acoust. Soc. Jpn. 12 2 1991 87