This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Dynamic Characteristics of Torsional Viscous-Friction Dampers on Reciprocating Engine Shaftings
Annotation ability available
Sector:
Language:
English
Abstract
Described herein is an experimental and theoretical study of the dynamic properties of torsional viscous-friction dampers for use on Diesel engines and the characteristics of torsional vibration of the engine shaftings.
At first, three kinds of dampers are fitted to a 14.3 liter, V-type, 8-cylinder Diesel engine and the torsional vibration displacements at the pulley are measured in order to investigate the characteristics of torsional vibration of the shaftings with the damper. The kinematic viscosity of silicone oil is diversely varied in this experiment. It is confirmed that an optimum viscosity exists for each damper from an experimental viewpoint.
Next, the dynamic properties of the dampers and the characteristics of torsional vibrations of the engine shaftings are investigated by 3 dimensional analysis of forced vibration by the transfer matrix method, which has been developed by the authors.
Finally, the optimum conditions of the viscous-friction dampers for the engine are estimated by comparing the calculated results with the experimental ones. In addition to that, the dynamic properties of the silicone oil, that are necessary for damper design, are given and the characteristics of the torsional vibration of the engine shaftings are also estimated from an analytical viewpoint.
Recommended Content
Authors
Citation
Wakabayashi, K., Honda, Y., Kodama, T., and Iwamoto, S., "The Dynamic Characteristics of Torsional Viscous-Friction Dampers on Reciprocating Engine Shaftings," SAE Technical Paper 921726, 1992, https://doi.org/10.4271/921726.Also In
References
- Ochiai K. et al. “Relation Between Crankshaf Torsional Vibration and Engine Noise” SAE Paper No. 790365
- Kubozuka T. et al. “Analytical Study on Engine Noise Caused by Vibration of Block and Crankshaft” SAE Paper No. 830346
- Okamura H. et al. “Engine Noise by Torsional Vibration of Crankshaft and its Reduction (in Japanese)” Mitsubishi Heavy Industry Technical Review 20 3 1983
- Hikino K. et al. “Torsional Damper of Diesel Engine for Heavy-duty Vehicles (in Japanese)” Journal of the S.A.E.J. 38 12 1984
- Okamura H. et al. “Development of High-Viscosity Damper (in Japanese)” Journal of the S.A.E.J. 40 9 1986
- Iwamoto S. et al “The Development of the Torsional Vibration Damper of Viscous Shear Type with Controllable Elasticity Effect (in Japanese)” Bulletin of the M.E.S.J. 15 1 1987
- Wakabayashi K. Iwamoto S. et al. “Analysis of Vibrations of Reciprocating Shaftings by the Transfer Matrix Method - The First Report, Analysis of Forced Vibration of a Crankshaft - (in Japanese)” Bulletin of the M.E.S.J. 8 1 1980
- Wakabayashi K. Iwamoto S. et al. “Analysis of Vibration of Reciprocating Shaftings by the Transfer Matrix Method - The Second Report, Calculation and Comparisons with Measured Data of Torsional Vibration - (in Japanese)” Bulletin of the M.E.S.J. 8 1 1980
- Wakabayashi K. Iwamoto S. et al. “Analysis of Vibrations of Reciprocating Shaftings by the Transfer Matrix Method - The Third Report, Bending Vibration Stresses Excited by Torsional Vibration of Crankshafts of High Speed Small Diesel Engine - (in Japanese)” Bulletin of the M.E.S.J. 17 12 1982
- Wakabayashi K. Iwamoto S. et al. “Analysis of Vibrations of Reciprocating Shaftings by the Transfer Matrix Method - The Fourth Report, Torsional Vibration Stress of a Crankshaft with a Viscous Fluid Damper - (in Japanese)” Bulletin of the M.E.S.J. 15 1 1980
- Wakabayashi K. Shimoyamada K. et aZ. “The Application of a Combined Transfer Matrix Method and Finite Element Method to the Estimation of Vibration Stress of a Reciprocating Engine Crankshaft” I.Mech.E. 1987
- Shimoyamada K. Iwamoto S. Kodama T. Wakabayashi K. “A Numerical Simulation Method for Vibration Stress Waveforms of Reciprocating Diesel Engine Crankshaft (in Japanese)” Journal of the M.E.S.J. 25 9 1990
- GEORGIAN J.C. “Torsional Viscous-Friction Dampers” Transactions of the A.S.M.E., Paper No.48-A-67 1949